field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

This position has the responsibility of ensuring that the buildings &amp; equipment owned by the college is in good operating condition. Travel from the Dyersburg main campus to other centers and service area locations in west Tennessee will be required as directed. Lead team members by sharing knowledge and helping each other complete task effectively and in a respectful manner. &nbsp;
Duties and Responsibilities:
<ul>
<li>Maintain HVAC equipment and heating systems.</li>
<li>Maintain and make additions to the electrical system as required.</li>
<li>Maintain and make additions to the plumbing systems as required.</li>
<li>Inspect equipment for signs of malfunctions, including visual and sound inspections.</li>
<li>Perform routine preventative maintenance and service.</li>
<li>Complete written record of work performed using IssueTrak software.</li>
<li>Use a variety of power and hand tools to perform job functions.</li>
<li>Keep current of all events &amp; activities being conducted in all areas of physical plant.</li>
<li>Maintain &amp; operate heating and cooling controls using Trane and Delta energy management software.</li>
<li>Maintain certification in the dispensing of CFC and HCFC refrigerants to comply with E.P.A. regulations.</li>
<li>Install and repair electrical outlets, lighting fixtures, timers, motor controls, and electric motors.</li>
<li>Repair house keeping tools such as vacuum cleaners, buffers, etc.</li>
<li>Repair electronic equipment such as circuit boards, battery chargers, etc.</li>
<li>Other duties as assigned.</li>
</ul>
Working Conditions:
Exertive: Significant exertion on a daily basis.&nbsp; Awkward postures and work positions: sustained postures and work positions; sustained activities require strength.&nbsp; Frequent lifting (30 – 50 lbs.). Some walking, pushing, pulling on a regular basis.&nbsp; Moderate exposure to dust, grease, noise, inclement weather, temperature extremes, and unpleasant but not hazardous odors.&nbsp; Occasional exposure to risk controlled by safety precautions.&nbsp; Frequency or severity is limited.
Required Qualifications:
CDL license preferred.
Electrical license preferred.
HVAC certified.&nbsp;
Knowledge and experience using energy management systems.
Attention to detail.
Must understand chiller plant operations.
Minimum Requirements of Education and Experience:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
High school/GED.
Valid Tennessee Driver’s License.
Minimum of three years’ experience with HVAC and EPA regulations.
Successful trade or vocational school completion preferred.
Three years’ experience in two or more of the building trades.
Enthusiastic and engaged mindset to get jobs done.
Minimum starting salary is $34,400 annually ($17.65 per hour). With additional experience pay increases to a maximum of $41,300.
Dyersburg State offers a comprehensive benefits package, including but not limited to the following:
<ul>
<li>Vacation and Sick Leave</li>
<li>14 paid holidays</li>
<li>Medical, dental, vision and life insurance</li>
<li>Retirement plans</li>
<li>Optional 401K and 403B Deferred Compensation Plans</li>
<li>Educational benefits for the employee and their spouse and dependents</li>
<li>State Employee Discount Program with over 900 merchants</li>
</ul>
Special Instructions to Applicants:
To be considered for this position applicant must submit an application, a resume, cover letter, and transcripts if applicable.&nbsp; &nbsp;Unofficial transcripts are acceptable for the application process; but official transcripts are required upon hire. You also must provide the contact information for a minimum of three (3) professional references.
Your skills, abilities, qualifications, and years of experience will be evaluated using only what is recorded on your application. Incomplete applications will not be considered.
A completed satisfactory background check will be required before hire.&nbsp;
Dyersburg State Community College&nbsp;is a TBR and AA/EEO employer and does not discriminate against students, employees, or applicants for admission or employment on the basis of race, color, religion, creed, national origin, sex, sexual orientation, gender identity/expression, disability, age, status as a protected veteran, genetic information, or any other legally protected class with respect to all employment, programs and activities.

Motlow State Community College


      Lead Maintenance Mechanic
    

Company Description Around the globe, we help cities and industries manage, optimize and make the most of their resources. We provide an array of solutions related to water, energy and materials to promote a cleaner more sustainable world for all of us. The collective expertise and passion of our people, combined with a broad portfolio of over 10,000 technologies, makes us uniquely positioned to deliver solutions that positively impact the environment. Come be part of something special - start your journey today! Job Description This position is a combined role and will be based from one of our Veolia Service Centers. When working from base the position will be an integral part of the facility maintenance team or potentially fabrication shop (depending on location). Due to the growth of the Services business, this position will be called upon to travel to other Veolia Service Centres mainly based in their region (South/West/Central or East/North/Central NAM). Purpose of the travel will be for facility expansion or upgrade projects and sometimes at customer sites. During the periods away from base the main function of this position will be on-site execution of Veolia facility CAPEX projects. Core function of the role will be mechanical installation, repair or upgrade activities. This role will perform duties to the highest standard with regard to professional attitude toward work and safety. When working from the base Service Center the role will ensure installation of equipment, machinery, general repairs are carried out efficiently and properly. Key Characteristics <ul><li>Travel to remote facilities to support on-site installation and maintenance of CAPEX projects.</li><li>Strict adherence to all EHS standards in accordance with both Veolia and site guidelines</li><li>Ability to read and implement engineering drawings and P&amp;ID's, Works according to project engineering standard</li></ul> Duties &amp; Responsibilities <ul><li>Travel to Veolia facilities or customer sites for on-site installation of CAPEX projects. Up to 50% travel</li><li>Works to best EHS standards, policies or procedures</li><li>Works in according to the install lead directions &amp; maintains clear communication to ensure smooth and efficient operations</li><li>Is available on-call for emergency needs to maintain project install schedule</li><li>Works according to the facility maintenance leader directions</li><li>Demonstrates excellent EHS standards and follows policies/procedures in order to keep self and others injury free</li><li>Install new equipment or re-arranges existing equipment.</li><li>Performs preventative maintenance activities at the facility or within the 'Mobile' fleet</li><li>Reliable and thorough approach to work.</li><li>Perform building and ground maintenance</li><li>Follow good housekeeping practices by keeping maintenance and tool storage area neat and clean as well as timely cleanup of work area after each job is completed.</li><li>Perform confined space entry in small tanks with 14x18" manways</li><li>Maintain records and reports as directed by immediate supervisor</li><li>Knowledge, Skills &amp; Abilities (List out required and preferred skills as applicable)</li><li>Ability and willingness to perform physical duties such as lifting, climbing, working at elevated heights, and manual dexterity</li><li>Ability and willingness to work confined space entry</li><li>Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities</li><li>Ability and willingness to read documents and implement such as safety rules, operating and maintenance instructions, and procedure manuals</li><li>Ability and willingness for on call status for emergency response</li><li>Ability and willingness to travel for install and repair if needed</li><li>Ability and willingness to travel where needed.</li></ul> Preferred: <ul><li>At least 1 year of repair and maintenance work experience.</li><li>Experience running Schedule 80 PVC pipe (2" to 8").</li><li>Trade school experience for plumbing, carpentry, and/or mechanical repair is highly desired</li><li>Positive displacements pump repair experience.</li></ul> Education &amp; Experience Required: <ul><li>High School Diploma, G.E.D., Home School Certification, or international equivalent to High School Diploma</li><li>Minimum of 1 year of PVC plumbing, OR mechanical repair and maintenance work experience or training</li></ul> Working Conditions: <ul><li>Ability and willingness to perform physical duties such as lifting, climbing, working at elevated heights, and manual dexterity</li><li>Ability and willingness to work confined space entry</li><li>Ability and willingness to work in range of environments to include but not limited to industrial</li><li>Ability and willingness for on call status for emergency response</li><li>Estimated Travel 50%</li></ul> Qualifications <ul><li>High School Diploma, G.E.D., Home School Certification, or international equivalent to High School Diploma</li><li>Minimum of 5 year of Pipe fitting or plumbing experience</li><li>Minimum of 5 years mechanical repair and maintenance experience or training</li></ul> ELIGIBILITY REQUIREMENTS: <ul><li>Ability and willingness to perform physical duties such as lifting, climbing, working at elevated heights, and manual dexterity</li><li>Ability and willingness to work confined space entry</li><li>Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities</li><li>Ability and willingness to read documents and implement such as safety rules, operating and maintenance instructions, and procedure manuals</li><li>Ability and willingness for on call status for emergency response</li><li>Ability and willingness to travel for install and repair if needed</li></ul> Additional Information We offer competitive compensation and benefits working in a dynamic environment with challenging projects and training provided to ensure your success. We realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We're an organization that champions diversity and inclusion at every level and are proud to be an equal opportunity workplace! As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Travel Team Maintenance and Install Technician

Company Description About Veolia North America A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Targeted Hourly Pay: minimum of $27.00 to a maximum of $30.00 BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Posting is short term (e.g. 6 months or less.) Position Purpose: Responsible for inspecting, troubleshooting, repairing and maintaining a variety of machinery and equipment to include engines, motors, tools, parts (hydraulic, pneumatic, electrical, etc.), plumbing, conveyor systems, etc. to ensure optimum performance of machines and associated equipment. Primary Duties/responsibilities: <ul><li>Troubleshoot mechanical devices and repair.</li><li>Repair and/or replace functional parts of control instruments and mechanical devices and interpret instructions and diagrams in correcting existing problems. </li><li>Maintain appropriate records on completed work performed and forwards logs along with findings to immediate supervisor.</li><li>Notifies supervisor of needed parts and machinery.</li><li>Other duties as assigned</li></ul> Qualifications Education / Experience / Background: <ul><li>High School diploma or General Educational Development (GED) required </li><li>Associate's degree with an emphasis in Electrical/Mechanical skills preferred</li><li>Minimum 1 year welding experience</li><li>Welding experience preferred</li><li>Prior work experience preferred</li></ul> Knowledge / Skills / Abilities: <ul><li>Strong team player</li><li>Excellent interpersonal and communication skills</li><li>Time management: the ability to organize and manage multiple deadlines</li></ul> Required Certification / Licenses / Training: <ul><li>OSHA HAZWOPER training required</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Maintenance Mechanic

Company Description About Veolia North America A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>. Job Description BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose: Performs maintenance services, installation, or repairs in one or more skill areas such as plumbing, mechanical, electrical repairs, pneumatic, hydraulic, installation, carpentry, painting, or vehicle servicing. Primary Duties/Responsibilities: <ul><li>Performs routine and preventative maintenance, lubrication and minor adjustments on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed and odor control, disinfection equipment, vacuum filters, and belt presses. Promptly reports any operational problems with machines or equipment to the Lead or Supervisor.</li><li>Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment ensuring safe and efficient operating conditions are restored. Learns to troubleshoot hydraulic, pneumatic, and electronic equipment and instrumentation.</li><li>Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint.</li><li>May perform manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles for plant operational purposes.</li><li>Learns to estimate time and material costs for various projects. May assist in other areas of plant as directed. </li></ul> Work Environment: <ul><li>Spends 100% of the time in the operations environment. </li><li>Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather. </li><li>Company service vehicles are used as required.</li><li>Travels 1 - 2 times per year for company provided training. </li><li>May serve rotational 24-hour emergency on-call.</li><li> Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water, and electrical hazards.</li></ul> Qualifications Education/Experience/Background: <ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety, and quality instructions) and be able to carry out verbal and written instructions.</li><li>Six months to two years of experience in a related position with ability to comprehend specifications, blueprints, and manuals.</li></ul> Knowledge/Skills/Abilities: <ul><li>Ability to perform basic mathematical calculations. </li><li>Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Experience using power, pneumatic, hydraulic, and hand tools and shop tools such as drill press, band saw, bench grinder, and torque wrench preferred.</li><li>Experience using material handling equipment, pressure gauges and precision measuring instruments.</li><li>Must have ability to operate Computer Maintenance Management System (software).</li><li>Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li></ul> Required Certification/Licenses/Training: <ul><li>Minimum water / wastewater license as required by regulatory agency at site.</li><li>Must possess a valid driver's license and a safe driving record.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, Confined Space training, OSHA, and Quality Training.</li><li>HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site. Minimum water / wastewater operator state certification.</li><li>Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)</li><li>Forklift Certification if required by site. </li><li>Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics, and control systems. </li><li>Obtain or maintain HVAC, Electrician, Plumber's, or other trade License if assigned to that area. Note: Tech will not perform duties unless properly licensed.</li><li>Training in the use of energy management systems as needed.</li><li>Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications.</li></ul> Physical Requirements: <ul><li>Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms. </li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds. </li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet. </li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Maintenance Mechanic II

Company Description About Veolia North America A subsidiary of Veolia group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. Please visit our website <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> . Job Description Targeted Annual Pay: $160,000.00 BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE: The Maintenance Manager's overall function will be to manage all maintenance functions ensuring the maximum productivity and economic function of the Brooklyn Navy Yard Cogeneration Plant (BNYCP). The Maintenance Manager is responsible for managing the daily maintenance of the plant. The Maintenance Manager identifies those areas which may need improvement or further development. The Maintenance Manager ensures plant safety and environmental compliance. Directs Maintenance personnel with safe and reliable maintenance practice. Responsible for coordinating, scheduling, and conducting mechanical, electrical, and I&amp;C corrective, predictive and preventive maintenance of all power equipment. Responsible for maintaining plant CMMS (Maximo). Lead, Plan, and execute minor and major outages with the support from other plant personnel. Ensures that the Maintenance Procedures are constantly reviewed, updated, and adhered to by the Maintenance Staff. Ensures that the Maintenance Staff are up to date with their training and qualifications. Collaborate with the Operations team to prioritize the workload in alignment with resources. PRIMARY DUTIES / RESPONSIBILITIES: <ul><li>Ensures the safe and quality maintenance of the plant equipment, buildings, and grounds in accordance with established Maintenance Procedures.</li></ul><ul><li>Takes necessary corrective action in accordance with established procedures and industry best practices and at the direction of the Plant Manager. Directs the Maintenance personnel in the inspection and repair of plant equipment and the performance of their duties in order to maintain safe, reliable, and efficient plant operation.</li><li>Verifies work order completion in a timely manner. Determines plant maintenance requirements by following preventive and predictive maintenance programs and reviewing, evaluating, and prioritizing maintenance work orders to establish job steps, estimate man-hours, and specify part and equipment needs, including recommended inventory.</li><li>Conducts periodic inspections / tours of the plant to inspect equipment, provides direction, supervision, and feedback to employees and ensures that all safety rules and plant procedures are followed.</li><li>Perform and assist in troubleshooting activities as required.</li><li>Supervises and oversees the Maintenance personnel skill improvement, training, and safety programs. Ensures that an adequate number of trained personnel are available to maintain the plant, even under adverse conditions.</li><li>Mentors the maintenance personnel and prepares them for additional responsibilities and future advancement. Sustains the morale and motivation of maintenance personnel and handles concerns and/or issues as they arise. </li><li>Assists with the screening and hiring of personnel. Develops and administers contracts and work scopes for external contractors to ensure maximum efficiency in the use of plant and contractor personnel. Responsible for planning, scheduling, and managing plant outages and overhauls as assigned.</li><li>Conduct/Support Regular Safety Meetings (at least monthly). Address Safety at all Group Meetings.</li><li>Respond to all safety-related incidents including, but not limited to injuries, incidents and near misses; write a report that explains what happened, identify the cause, and recommend corrective action following any established business unit or division practice. </li><li>Follow up as necessary to ensure that corrective action is taken. Maintain the plant Maintenance Manuals and assure that maintenance policies and procedures are kept up to date.</li></ul> PHYSICAL REQUIREMENTS / WORK ENVIRONMENT <ul><li>Physical requirements include the possibility of standing for extended periods of time, stair and ladder climbing and routinely lifting up to 50 pounds. Protective equipment must be worn in the performance of some duties (e.g., hard hats, safety glasses, air masks, ear protection, chemical suits, hot gloves, and high voltage protective equipment, etc.). Work with hazardous materials may be required. </li><li>Position requires extended working hours and varied shifts with weekend and holiday work, as required by schedules, workload, and project conditions. "On call" status will periodically be required.</li></ul> Qualifications Education / Experience / Background <ul><li>A technical undergraduate degree or equivalent work experience is required.</li><li>Extensive experience in natural gas fired combined cycle power plant operations and maintenance is highly desired. </li><li>Experience with LOTO process and procedures. </li><li>Working knowledge of instrumentation and controls, electricity, rotating equipment, power plant mechanics and operations are highly desired. </li><li>Experience managing plant outages with multiple contractors.</li><li>Experience supervising hourly personnel, strong leadership and motivational skills are required.</li></ul> Knowledge / Skills / Abilities <ul><li>Excellent written and verbal communication skills desired.</li><li>Proficient in time management skills. </li><li>Strong proficiency in computer skills, including Microsoft Office (Excel, Word, Project, etc.) and CMMS/Maximo systems are required.</li></ul> Required Certification / Licenses / Training <ul><li>Current and valid driver's license.</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Maintenance Manager

Company Description About Veolia North America A subsidiary of Veolia group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. Please visit our website <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> . Job Description Targeted Annual Pay: $175,000.00 BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE: The O&amp;M Manager's overall function will be to manage all operations and maintenance functions, ensuring the safety of personnel and equipment, maximum productivity, and economic function of a Cogeneration Plant. The O&amp;M Manager is responsible for managing the daily operations and maintenance of the plant. The O&amp;M Manager directs the implementation of the Operating Plan and identifies those areas which may need improvement or further development. The O&amp;M Manager ensures that the plant operating conditions are always kept within operating limits and ensures plant safety and environmental compliance. Directs Operations personnel with safe and reliable operation of the plant. Responsible for coordinating, scheduling, and conducting mechanical, electrical, and I&amp;C corrective and preventive maintenance of all power equipment. Responsible for maintaining plant CMMS (Maximo). Reports normal, and/or emergent plant conditions and or maintenance that could impact power production in a timely manner. Lead, Plan, and execute minor and major outages with the support from other plant personnel. PRIMARY DUTIES / RESPONSIBILITIES: <ul><li>Ensures the safe and reliable operation of the plant in accordance with established operating procedures.</li><li>Operate the plant as per the day ahead schedule for energy and steam production per the day ahead award.</li><li>Takes necessary corrective action in accordance with established procedures and industry best practices and at the direction of the Plant Manager. Directs Maintenance personnel in the inspection and repair of plant equipment and the performance of their duties in order to maintain safe, reliable and efficient plant operation.</li><li>Verifies work order completion in a timely manner. Determines plant maintenance requirements by following preventive and predictive maintenance programs and reviewing, evaluating, and prioritizing maintenance work orders to establish job steps, estimate man-hours, and specify part and equipment needs, including recommended inventory.</li><li>Conducts periodic inspections / tours of the plant to inspect equipment, provides direction, supervision, and feedback to employees and ensures that all safety rules and plant procedures are followed.</li><li>Perform and assist in troubleshooting activities as required.</li><li>Supervises and oversees Maintenance and Operations personnel skill improvement, training, and safety programs. Ensures that an adequate number of trained personnel are available to operate and maintain the plant, even under adverse conditions.</li><li>Mentor's operations and maintenance personnel and prepares them for additional responsibilities and future advancement. Sustains the morale and motivation of operations and maintenance personnel and handles concerns and/or issues as they arise. </li><li>Assists with the screening and hiring of personnel. Develops and administers contracts and work scopes for external contractors to ensure maximum efficiency in the use of plant and contractor personnel. Responsible for planning, scheduling, and managing plant outages and overhauls.</li><li>Conduct/Support Regular Safety Meetings (monthly). Address Safety at all Group Meetings.</li><li>Respond to all safety-related incidents including, but not limited to injuries, incidents and near misses; write a report that explains what happened, identify the cause, and recommend corrective action following any established business unit or division practice.</li><li>Follow up as necessary to ensure that corrective action is taken. Maintain the plant Operations Manuals and assure that operating policies and procedures are kept up to date</li></ul> PHYSICAL REQUIREMENTS / WORK ENVIRONMENT <ul><li>Physical requirements include the possibility of standing for extended periods of time, stair and ladder climbing and routinely lifting up to 50 pounds. Protective equipment must be worn in the performance of some duties (e.g., hard hats, safety glasses, air masks, ear protection, chemical suits, hot gloves, and high voltage protective equipment, etc.). Work with hazardous materials may be required. </li><li>Position requires extended working hours and varied shifts with weekend and holiday work, as required by schedules, workload, and project conditions. "On call" status will periodically be required.</li></ul> Qualifications Education / Experience / Background <ul><li>A technical undergraduate degree or equivalent work experience is required.</li><li>Extensive experience in natural gas fired combined cycle power plant operations and maintenance is highly desired.</li><li>Experience with LOTO process and procedures.</li><li>Working knowledge of instrumentation and controls, electricity, rotating equipment, power plant mechanics and operations are highly desired.</li><li>Ability to troubleshoot mechanical, electrical, instrumentation, and controls with attention to detail desired.</li><li>Experience managing plant outages with multiple contractors.</li><li>Experience supervising hourly personnel, strong leadership and motivational skills are required.</li></ul> Knowledge / Skills / Abilities <ul><li>Excellent written and verbal communication skills desired.</li><li>Proficient in time management skills.</li><li>Strong proficiency in computer skills, including Microsoft Office (Excel, Word, Project, etc.) and CMMS/Maximo systems are required.</li></ul> Required Certification / Licenses / Training <ul><li>Current and valid driver's license.</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Operations and Maintenance Manager O&M

Company Description About Veolia North America A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>. Job Description BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose: The Maintenance Manager will develop work plans and manage maintenance projects/records as well as spend time out in the areas of plant operations to study systems and equipment and develop work plans. The Maintenance Manager will direct the plant maintenance personnel and participate directly in maintenance work execution work plans. Primary Duties/Responsibilities: <ul><li>Develop and maintain schedule to meet routine maintenance needs.</li><li>Prepare detailed work plans for each scheduled work task.</li><li>Coordinate labor, parts, materials, tools / equipment and access to the equipment.</li><li>Maintain a well organized parts and equipment inventory and storage.</li><li>Schedule and allocate labor to ensure work tasks are completed in a timely and efficient manner.</li><li>Document and track each work task to ensure efficiency, communicate any major variances.</li><li>Develop and create SOP's for routine and non-routine maintenance tasks and up-load into maintenance system (VAMS) as needed.</li><li>Perform work tasks and duties in a cost effective manner and communicate budget.</li><li>Ensure all applicable safety and environmental regulations are followed during the performance of all job tasks.</li><li>Identify, schedule and provide any OEM/equipment training needs.</li><li>Work with department management to schedule any routine maintenance if shutdown/downtime/availability is needed during normal production hours as needed.</li><li>Track asset availability including uptime, and downtime with downtime cause.</li><li>Perform equipment failure analysis and document findings, lead RCAs as needed.</li><li>Identify additional equipment / tools necessary to improve uptime.</li><li>Identify and maintain spare parts/equipment inventory requirements.</li><li>Coordinate and supervise contracted job activities as needed.</li><li>Develop and maintain positive relationships with vendors and subcontractors.</li><li>Actively participate in weekly Operations &amp; Management meetings.</li><li>Provide weekly reports to General Manager:<ul><li>Uptime/availability report.</li><li>Completed weekly work plan tasks.</li><li>Upcoming weekly work plan tasks.</li><li>Parts / equipment inventory needs.</li><li>Major upcoming maintenance items (contracted work, shutdown maintenance needs, labor needs, equipment failures, etc).</li></ul></li><li>Other duties as assigned by management.</li></ul> Work Environment: <ul><li>The job holder spends most of their time in an industrial environment to the repair and maintenance of equipment.</li><li>The position requires frequent exposure and sustains to noise and dirt.</li><li>The job holder is required to work in an environment where there will be temperature's changes (hot / cold).</li></ul> Qualifications Education/Experience/Background: <ul><li>High School Diploma/GED is required.</li><li>Technical or trade school graduate in similar field.</li><li>4 years of experience supervising a in plant, building, or large facility as a Maintenance Manager or Senior Planner/Scheduler.</li><li>2 years of experience leading or supervising a small team of technicians.</li><li>Demonstrated experience with instrumentation + control systems for Plant Operations.</li><li>Experience in a plant, building, or facility maintenance background.</li><li>Bachelor's degree in Mechanical or Electrical Engineering preferred.</li><li>Supervisory experience is a must.</li></ul> Knowledge/Skills/Abilities: <ul><li>Working knowledge of Computerized Maintenance Management Systems (CMMS).</li><li>Proficiency in MS Word, Excel, and Microsoft Office.</li><li>Ability to prioritize workload, be detail oriented in a deadline-driven, fast-paced environment.</li><li>Requires excellent time management, organization and prioritization capability and excellent communication and organizational skills.</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>.&nbsp;Follow @howmet: Twitter, Instagram, Facebook, LinkedIn and YouTube. This off-shift (2nd or 3rd) position is located in our Plant 3, Whitehall Casting Operation. Responsibilities will include execution of preventative maintenance program in conjunction with engineering and maintenance staff; participate in plant safety inspections; oversee repairs of breakdowns; oversee preventative maintenance; work with outside contractors; coordinate office moves and rearrangements; direct maintenance of equipment; maintain responsibility for maintenance of building. JOB ROLES: <ul><li>Perspective--understands and anticipates business needs; reviews data to adjust approaches as needed; provides information and justification for decisions; sees gray areas and thinks strategically</li><li>People support--provides information, training and communication to ensure others are successful; advocates for associates; helps people grow; gives guidance and accountability; inspires, incentivizes and rewards others</li><li>Coordination--maintains a broad team attitude in working with peers; does what is best for the business and its goals; makes decisions based on inputs from multiple stakeholders; manages multiple areas and shifts; enables continuous improvement efforts while maintaining performance</li><li>Influence-- delegates effectively; capable of explaining the “why” behind a recommendation or directive; advocates for the business; maintains approachability; deals with conflict and change effectively; persuades others to buy in to segment, plant and team goals</li><li>Organization and structure--plans daily; coordinates to deliver on time; ensures efficiencies while balancing priorities of multiple projects and stakeholder groups; has contingency plans</li><li>Communication and relationship--maintains tension between connection and discipline; connected to operators and shop floor; translates and disseminates information readily both up and down the chain of command</li><li>Ownership--accepts accountability for the performance of others and the business; inspires ownership and improvement in others; invites measurement; self-motivated; invents and implements ideas for improvement; committed to safety; works at a macro level, not merely focused on single tasks</li><li>Troubleshooting--anticipates and identifies problems quickly; works with other functions to create solutions; ensures channels of communication stay open; owns the process of ensuring things function well; elevates issues as needed&nbsp;</li></ul> RESPONSIBILITIES: <ul><li>Supervises an effective team; includes planning and holding meetings, preparing and conducting performance appraisals as appropriate, managing staffing levels (including vacations, overtime, and leaves of absences), assisting with career development (motivates, coaches, and trains to acquire maximum quality, productivity, morale, and cooperation), approving time and attendance, and prioritizing and making work assignments.</li><li>Provides effective feedback to employees, both positive and negative.&nbsp; Maintains appropriate documentation for all disciplinary actions taken.</li><li>Directs training and orientation of employees to ensure EHS rules are known and understood, to improve work performance, and acquaint employees with company policies and procedures.</li><li>Maintains compliance with the collective bargaining agreement.&nbsp; Interfaces between management and union officials.&nbsp; Handles grievances.</li><li>Ensures compliance with company policies, procedures, and practices.</li><li>Schedules production and work team.</li><li>Reviews production and operating reports and resolves operations, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays.</li><li>Inspects machines and equipment to ensure specific operational performance and optimum utilization.</li><li>Promotes EHS and continuous improvement initiatives and culture.</li></ul> BASIC QUALIFICATIONS: <ul><li>High school diploma or GED from an accredited institution.</li><li>Minimum of 3 years leadership experience</li><li>Successfully meet the Supervisor Assessment requirements.&nbsp; If applicant has 5 years or greater direct manufacturing leadership experience, testing is not required.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul> PREFERRED REQUIREMENTS: <ul><li>Experience supervising in a manufacturing environment, preferably a maintenance department.</li><li>Must be able to read blueprints</li><li>Experience with TPM, Synchronous Mfg, and Kaizen Concepts.</li><li>Must be able to communicate effectively with all levels of the organization, have good team building skills, excellent people skills; ability to handle multiple tasks, technically oriented.</li><li>Must be energetic and a self-starter, able to promote and implement change, have good PC skills, good telephone skills, strong organizational skills, and ability to promote a continuous improvement atmosphere.</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

MAINTENANCE SUPERVISOR - Plant 3 - Off Shift

ABOUT GREYSTARGreystar is a leading, fully integrated global real estate company offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing, logistics, and life sciences sectors. Headquartered in Charleston, South Carolina, Greystar manages and operates more than $290 billion of real estate in 247 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, manages more than 857,400 units/beds globally, and has a robust institutional investment management platform comprised of more than $76 billion of assets under management, including over $34 billion of development assets. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. To learn more, visit <a href="http://www.greystar.com" target="_blank">www.greystar.com</a>. JOB DESCRIPTION SUMMARYThis position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality.JOB DESCRIPTION&nbsp;Essential Responsibilities: 1. Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements.&nbsp;2. Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work.&nbsp;3. Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs.&nbsp;4. Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked.&nbsp;5. Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed.&nbsp;6. Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment.&nbsp; &nbsp;Other Responsibilities:&nbsp; 1. Complies with Greystar’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately.&nbsp;2. May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required.&nbsp;Service Technician&nbsp;3. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management.&nbsp;Required Licenses or Certifications: •&nbsp;&nbsp; &nbsp;Incumbents must have EPA certifications Type 1 and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have valid driver’s license to operate a golf cart on property depending on the property size.#LI-TF1The hourly rate for this position is $19.00 - $21.00.Additional Compensation:<ul><li>Corporate Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in&nbsp;an annual bonus program based on&nbsp;individual and company performance.</li><li>Onsite Property Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in weekly, monthly, and/or quarterly bonus programs.</li></ul>Robust Benefits Offered*:<ul><li>Competitive Medical, Dental, Vision, and Disability &amp; Life&nbsp;insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service.</li><li>Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 10 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure.</li><li>For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability.</li><li>6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter).</li><li>401(k) with Company Match up to 6% of pay after 6 months of service.</li><li>Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy).</li><li>Employee Assistance Program.</li><li>Critical Illness, Accident, Hospital&nbsp;Indemnity, Pet&nbsp;Insurance and Legal Plans.</li><li>Charitable giving program and benefits.</li></ul>*Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed&nbsp;information above due to Collective Bargaining Agreements and/or local governing authority.Greystar will consider for employment qualified applicants with arrest and conviction records.

Greystar

Maintenance Technician - 4000 Margaret

ABOUT GREYSTARGreystar is a leading, fully integrated global real estate company offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing, logistics, and life sciences sectors. Headquartered in Charleston, South Carolina, Greystar manages and operates more than $290 billion of real estate in 247 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, manages more than 857,400 units/beds globally, and has a robust institutional investment management platform comprised of more than $76 billion of assets under management, including over $34 billion of development assets. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. To learn more, visit <a href="http://www.greystar.com" target="_blank">www.greystar.com</a>. JOB DESCRIPTION SUMMARYThis position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality.JOB DESCRIPTION&nbsp;Essential Responsibilities: 1. Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements.&nbsp;2. Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work.&nbsp;3. Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs.&nbsp;4. Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked.&nbsp;5. Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed.&nbsp;6. Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment.&nbsp; &nbsp;Other Responsibilities:&nbsp; 1. Complies with Greystar’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately.&nbsp;2. May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required.&nbsp;Service Technician&nbsp;3. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management.&nbsp;Required Licenses or Certifications: •&nbsp;&nbsp; &nbsp;Incumbents must have EPA certifications Type 1 and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have valid driver’s license to operate a golf cart on property depending on the property size.#LI-SV1The hourly range for this position is $21.00 - $23.00Additional Compensation:<ul><li>Corporate Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in&nbsp;an annual bonus program based on&nbsp;individual and company performance.</li><li>Onsite Property Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in weekly, monthly, and/or quarterly bonus programs.</li></ul>Robust Benefits Offered*:<ul><li>Competitive Medical, Dental, Vision, and Disability &amp; Life&nbsp;insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service.</li><li>Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 10 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure.</li><li>For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability.</li><li>6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter).</li><li>401(k) with Company Match up to 6% of pay after 6 months of service.</li><li>Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy).</li><li>Employee Assistance Program.</li><li>Critical Illness, Accident, Hospital&nbsp;Indemnity, Pet&nbsp;Insurance and Legal Plans.</li><li>Charitable giving program and benefits.</li></ul>*Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed&nbsp;information above due to Collective Bargaining Agreements and/or local governing authority.Greystar will consider for employment qualified applicants with arrest and conviction records.

694 Facilities and Maintenance Jobs