field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

<h4>Company Description</h4>About Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website&nbsp;<a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>.<h4>Job Description</h4>BENEFITS&nbsp;Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.&nbsp;Position Purpose:&nbsp;Performs a variety operations and maintenance on infrastructure systems including water distribution, sewer and storm water collection, streets, and other items as assigned. The work includes but is not limited to installation, repair, troubleshooting, and maintenance of customer equipment presently on Fort Monroe.Primary Duties/Responsibilities: <ul><li>Follow all safety protocols and ensure everyone on the project does the same.</li><li>Ability to perform maintenance, repairs, and installation on water distribution and sewer collection systems. Knowledge of piping systems, valves, pumps, and other components of utility systems.</li><li>Ability to utilize generators, vacuum trailers, jetters, pressure washers, forklifts, and similar equipment to accomplish operations and maintenance activities.</li><li>Proficient understanding and use of all conventional tools and meters to maintain, repair, calibrate and test components found in the systems described above.</li><li>Prepare technical reports to accurately describe conditions and work performed.</li><li>Prepares appropriate documentation for completion of work orders.</li><li>Reads meters and accurately reports data.</li><li>Maintain and develop good customer relations while promoting the image of the company.</li></ul>Work Environment:<ul><li>Required to work in confined spaces, climb ladders, scaffolding and stairs.</li><li>Required to work in all weather conditions, both indoors and outdoors.</li><li>May be required to work periodic overtime or on weekends and holidays for emergencies or client required special events.</li></ul><h4>Qualifications</h4>Education/Experience/Background:&nbsp;<ul><li>High School Diploma/GED is required.</li><li>5 plus years of experience working in the trades in a field service role.</li></ul>Knowledge/Skills/Abilities:&nbsp;<ul><li>Required adhering to customer and facility rules and regulations.</li><li>Possesses ability to troubleshoot and problem solve mechanical and/or piping systems.</li></ul>Required Certification/Licenses/Training:&nbsp;<ul><li>Must have a valid VA driver's license, and safe driving record.</li><li>CDL license is desirable but not mandatory.</li><li>A Virginia Waterworks Class 6 or better license is desirable but not mandatory.</li></ul>Physical Requirements: <ul><li>Required to wear appropriate Personal Protective Equipment where proper safety procedures warrant their use.</li><li>Required to lift and / or operate machinery, tools, etc., weighing up to 50 pounds unassisted.</li></ul><h4>Additional Information</h4>We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Field Service Technician

<h4>Company Description</h4>About Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website&nbsp;<a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>.<h4>Job Description</h4>Pay Rate: $25.00 per hour.BENEFITS&nbsp;Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.Position Purpose:&nbsp;Under the direction of Project Manager, work performed includes the day-to-day operations, maintenance, and laboratory for the Rockland Wastewater Treatment facility. Work also includes maintaining the 13 pump stations and assisting the town in the collection system.Primary Duties/Responsibilities:&nbsp;<ul><li>Maintaining safe and reliable operations of the wastewater treatment facilities and the pump stations ensuring operational compliance with state and federal regulations.</li><li>Share duties with other co-workers to complete the day-to-day operations, maintenance, and lab.</li><li>Operates equipment either through SCADA or by manual control.</li><li>Monitors and observes operating conditions. Records observations and data in a logbook.</li><li>Diagnose basic operational problems and take corrective action. Communicates status changes and abnormalities in operating areas.</li><li>Follows process control procedures for assigned areas. Verifies and reports suspected malfunctions to the supervisor.</li><li>Creates and closes preventative and corrective maintenance in the CMMS (Maintenance) Program.</li><li>Monitor chemical supplies and will inform the supervisor when running low.</li><li>Operate and calibrate equipment for lab analysis.</li><li>Collect wastewater samples and perform the necessary laboratory and field analyses.</li><li>Perform routine mathematical calculations.</li><li>Performs maintenance including routine preventive maintenance, lubrication, minor adjustments, and basic troubleshooting of equipment.</li><li>Operates and maintains project vehicles.</li><li>Assured work is performed in a safe and professional manner by following established safety, operating and emergency response procedures.</li><li>Completes all required safety classes assigned by the company.</li><li>Required rotational schedule for emergencies after hours call list, working holidays, and weekends.</li><li>All outside work including but not limited to snow removal, salting, mowing grass, and week trimming.</li><li>Routine cleaning and general housekeeping duties in all building areas as assigned, including but not limited to sweeping, dusting, mopping, painting, and cleaning of other process equipment and areas.</li><li>Assists the project to develop a culture of focus to achieve EH&amp;S (Environment, Health, and Safety) excellence.</li></ul>Work Environment:<ul><li>Work is performed both inside and outside with exposure to all kinds of temperature&nbsp;conditions.</li><li>Must be able to adverse weather conditions for extended periods of time.</li><li>At times there may be occasional exposure to some noise, silica, dust, fumes, smoke, gases, greases, oils, electrical energy, solvents, and vibrations.</li><li>The working environment may happen to take place on slippery or uneven surfaces, around machinery with moving parts, moving objects or moving vehicles, and while standing on ladders or scaffolding.</li><li>It is also possible to be exposed to water and other liquid materials.</li></ul><h4>Qualifications</h4>Education/Experience/Background:&nbsp;<ul><li>High School Diploma/GED is required.</li><li>Preferably has 1-3 years of experience in the water or wastewater field.</li><li>Strong reading, math, writing, and verbal communication skills.</li></ul>Knowledge/Skills/Abilities:&nbsp;<ul><li>Strong mechanical aptitude and ability to read, interpret, and record data from meters, gauges, scales, panels, computer consoles, and other equipment.</li><li>Demonstrate a working ability to use computer programs like Google (Sheets, Docs, Drive), and the CMMS (maintenance program).</li><li>Requires ability to troubleshoot and take action either by solving the issue or communicating with a senior operator.</li><li>Requires the ability to understand and carry out verbal and written instructions.</li><li>Must be able to work as a team in a teamwork environment.</li><li>Follow all company safety rules.</li></ul>Required Certification/Licenses/Training:&nbsp;<ul><li>Valid Driver’s license and safe driving record.</li><li>Ability to obtain MA Grade 5C Wastewater Treatment Operator license within 6 months of hire.</li></ul>Physical Requirements: <ul><li>While performing the duties of this job, the employee needs the ability to work in various positions which require standing, walking, sitting, bending, squatting, climbing stairs, and working with their hands.</li><li>The employee is frequently required to climb up, and down safely from ladders. Must be able to lift and carry 50 pounds.</li><li>Specific vision abilities required by this job include ability to distinguish color, as well as seeing near and far.</li></ul><h4>Additional Information</h4>We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

O&M Technician I

<h4>Introduction</h4> Are you a current Department of Transportation (DOT) employee looking to advance your career within the agency?&nbsp; Do you want to continue helping in making commuting and traveling throughout CT safe?&nbsp; If so, read below &amp; apply today! TheState of Connecticut,&nbsp;Department of Transportation&nbsp;(DOT) invites&nbsp;qualified agency employees to apply for the position of&nbsp;&nbsp;Transportation Maintainer 3&nbsp;(Over-the-Fence Mower Operator) in the Groton Maintenance facility.&nbsp; &nbsp; ELIGIBILITY REQUIREMENTS: <ul><li>Candidates must indicate they hold a current and valid Commercial Driver's License (CDL) with tank endorsement in the "Licenses and Professional Certifications" section of the application, or they will not be considered.&nbsp; Applicants invited to interview will be required to produce a copy of their current valid Commercial Driver's License (CDL) Class A or B, reflecting the "tank endorsement," and valid Medical Examiner's Card (MEC) at time of interview, or they will be immediately disqualified.&nbsp;</li><li>Incumbents in this class must be willing to accept assignment to emergency duties, including snow and ice removal, whenever his or her services are needed; to include mandatory winter overtime from November 1 through April 30. Various storm events will require employees to stay at work for the duration of the storm, which at times could be up to a period of several days, to include holidays and weekends.&nbsp;&nbsp;</li><li>Incumbents in this class will be required to have a 20-mile residency from the posted job location.&nbsp;</li><li>Candidates will be required to bring a copy of their Master Application at the time of interview.</li><li>The Agency will conduct a practicum for the Transportation Maintainer 3 (Over-the-Fence Mower Operator) position, to evaluate and determine whether or not applicant(s) have the skills and qualifications to perform the duties of this position.&nbsp; Practicums shall be conducted pursuant to the Department of Transportation Administrative Guidelines for Conducting Practicums and will be part of the interview process.</li><li>Eligible candidates will be required to be interviewed, prior to being eligible for the skill evaluation practicum.</li><li>Candidates must show how they meet the required knowledge and experience on their application to proceed further in the hiring process.</li></ul>WHAT WE CAN OFFER YOU: As a state employee, you will continue to enjoy: <ul><li>Visit our&nbsp;newState Employee Benefits Overview&nbsp;page!</li><li>The opportunity to work for a Forbes top company: 'Forbes'&nbsp;State of Connecticut Ranked One of the Best Employers of 2023&nbsp;- State of CT Receives National Recognition for Offering Job Growth, Competitive Benefits, and Flexible Schedule</li><li>Professional growth and development opportunities</li><li>A healthy&nbsp;work/life balance&nbsp;to all employees</li><li>Join an award winning agency! CTDOT was recently awarded the&nbsp;Employer of the Year&nbsp;award by the&nbsp;Connecticut Society of Civil Engineers&nbsp;(CSCE)!</li></ul> POSITION HIGHLIGHTS: <ul><li>Monday-Friday</li><li>Full-time (40 hours/week)</li><li>1st Shift (7:30am-4:00pm)</li></ul> THE ROLE: <ul><li>The purpose of this position is responsible for safely operating and maintaining the above identified equipment in this job posting.</li></ul> WHO WE ARE:&nbsp; <ul><li>At DOT, our mission is to provide a safe and efficient intermodal transportation network that improves the quality of life and promotes economic vitality for the State and the region. Learn more about our mission, vision, and values&nbsp;here!</li></ul> <h4>Selection Plan</h4> <ul><li>In order to be considered for this job opening you must be a current State of CT employee of the agency listed above&nbsp;for at least&nbsp;six (6) months of full-time service or full-time equivalent service, absent any applicable collective bargaining language, and meet the Minimum Qualifications as listed on the job opening.&nbsp; You must specify your qualifications on your application.&nbsp;</li><li>These positions will be filled in accordance with contractual language, reemployment, SEBAC, transfer, promotion and merit employment rules. Applications to this recruitment will be used to meet collective bargaining requirements. Once any collective bargaining requirements have been met, all other applicants may be considered.</li><li>For employees in the classified service, permanent status is obtained after successful completion of a working test period.&nbsp; For employees in the unclassified service, permanent status is obtained after serving in a position for at least six months (full-time or full-time equivalent).&nbsp;</li></ul> To Apply: <ul><li>The minimum experience and training requirements must be met by the close date on the job opening, unless otherwise specified. </li><li>Ensure that your application is complete and detailed before submitting it. In order to comply with&nbsp;Public Act 21-69, the State of Connecticut is no longer asking for resumes during the initial application process. You will not be able to make revisions once your application is submitted into the JobAps system.</li><li>Please select all location(s) and shift(s) you are willing to work on your application. Failure to do so may result in not being considered for vacancies in that specific location or shift.</li><li>In order to receive educational credits toward qualification for this job posting, the institution must be accredited. If the institution of higher learning is located outside of the U.S., you are responsible for providing documentation from a recognized USA accrediting service which specializes in determining foreign education equivalencies to the Talent Acquisition Professional listed on this job posting. </li><li>All application materials must be received by the recruiting agency by the time specified on the job opening for the position for which you are applying. Late applications may not be submitted and will not be considered. Exceptions are rare and limited to documented events that incapacitate a candidate during the entire duration of the job posting time period. It is the candidate’s obligation and responsibility to request an exception and provide a legally recognized justification to accommodate such exception. Requests should be made to&nbsp;<a href="mailto:DAS.SHRM@ct.gov" target="_blank">DAS.SHRM@ct.gov</a>.</li></ul> FOR ASSISTANCE IN APPLYING: <ul><li>Please&nbsp;read&nbsp;or&nbsp;watch&nbsp;our Applicant Tips on How to Apply.</li></ul> Important Information After You Apply: <ul><li>This posting may require completion of additional referral questions (RQs). You can access these RQs via an email that will be sent to you after the posting's closing date or by visiting your JobAps Personal Status Board (Certification Questionnaires section). Your responses to these RQs must be submitted by the questionnaire's expiration date. Please regularly check your email and JobAps Personal Status Board for notifications. Please check your SPAM and/or Junk folders on a daily basis in the event an email provider places auto-notification emails in a user's spam.</li><li>Although applicants will receive correspondence via email, as a backup they are also encouraged to sign on to their Personal Status Board on a daily basis to monitor their status, view all emailed notices and complete tasks required in the recruitment process.</li><li>Note: At any point during the recruitment process, applicants may be required to submit additional documentation which support their qualification(s) for this position. These documents may include: a cover letter, resume, performance reviews, attendance records, supervisory references, licensure, etc., at the discretion of the hiring agency.</li><li>Interviews will be limited to candidates whose experience and training most closely meet the requirements of the position.</li><li>Read through this helpful&nbsp;link to&nbsp;prepare for your interview.</li><li>The immediate vacancy is listed above, however, applications to this recruitment may be used for future vacancies in this job class.</li><li>Candidates who are offered and accept a position with the State of Connecticut are bound by the State Code of Ethics for Public Officials and State Employees which is available at&nbsp;<a href="http://www.ct.gov/ethics" target="_blank">www.ct.gov/ethics</a>. </li></ul> Connect With Us: <ul><li>Due to the large volume of applications received, we are unable to provide confirmation of receipt or status during the recruitment process. Updates will be available through your JobAps portal account. Should you have any questions pertaining to this recruitment, please contact Anamaria Giangarra at&nbsp;<a href="mailto:Anamaria.giangarra@ct.gov" target="_blank">Anamaria.giangarra@ct.gov</a>.</li></ul> <h4>PURPOSE OF JOB CLASS (NATURE OF WORK)</h4> In the Department of Transportation and the Connecticut Airport Authority this class is accountablefor performing a variety of skilled tasks at less than the journeyperson level in the construction,maintenance and repair of state roadsides, roadways, bridges, airports and other departmentalfacilities; operates and maintains the more complex mechanical equipment; works as a skilledmechanic at less than the journeyperson level in the repair of mechanical equipment. <h4>EXAMPLES OF DUTIES</h4> See attached addendum. <h4>KNOWLEDGE, SKILL AND ABILITY</h4> <ul><li>Considerable knowledge of construction, maintenance and repair techniques of roadsides, roadways, bridges or airports;&nbsp;</li><li>Knowledge of processes and materials used in construction and maintenance trades;&nbsp;</li><li>Oral and written communication skills;&nbsp;</li><li>Considerable ability to use and make ordinary repairs to more complex mechanical equipment;&nbsp;</li><li>Ability to <ul><li>operate equipment as listed on attached Addendum;&nbsp;</li><li>keep shop records and prepare reports;&nbsp;</li><li>use, set up and maintain ordinary bench and other shop machine tools and equipment;&nbsp;</li><li>understand and follow written and oral instructions;&nbsp;</li><li>utilize computer software.</li></ul></li></ul> <h4>MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE</h4> Two (2) years of experience in the construction, landscaping, commercial driving, snow plowing,maintenance and repair of roadsides, roadways, bridges or airports, in work involving theoperation and care of mechanical equipment, or in work in one of the recognized maintenancetrades. <h4>MINIMUM QUALIFICATIONS - SUBSTITUTIONS ALLOWED</h4> Graduation from a vocational or technical school with a diploma designating completion of thesubject requirements in one of the maintenance trades may be substituted for the GeneralExperience. <h4>PREFERRED QUALIFICATIONS</h4> <ul><li>Working-knowledge and experience safely operating an Over-the-Fence Mower.</li><li>Experience maintaining and performing minor equipment repairs.</li></ul> <h4>SPECIAL REQUIREMENTS</h4> <ul><li>Incumbents in this class may be required by the appointing authority to possess and retain appropriate current licenses, permits and/or certifications.</li><li>Incumbents in this class must be willing to accept assignment to emergency duties, including snow and ice removal, whenever their services are required.</li></ul> <h4>CHARACTER REQUIREMENTS</h4> At state airports: In addition to the checking of references and of facts stated in the application, athorough background investigation of each candidate may be made before persons are certified forappointment. <h4>PHYSICAL REQUIREMENTS</h4> <ul><li>Incumbents in this class must have adequate physical strength, stamina, physical agility and visual and auditory acuity, and must maintain such physical fitness in order to perform the duties of the class.</li><li>A physical examination will be required.</li></ul> <h4>WORKING CONDITIONS</h4> <ul><li>Incumbents in this class are exposed to extremes of weather conditions, to frequent lifting of heavy weights, to highly dangerous road and traffic conditions, including exposure to heights when working on bridges, to poison ivy, insect bites and allergy irritants during summer months, and to loud and potentially dangerous machinery.</li><li>The appointing authority may require completion of an asbestos removal program consistent with EPA guidelines for operations and maintenance during employment in this class. Incumbents may be required to use protective equipment such as respirators and safety goggles.</li></ul> <h4>Conclusion</h4> AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities. <h4>ACKNOWLEDGEMENT</h4> As defined by Sec. 5-196 of the Connecticut General Statutes, a job class is a position or group of positions that share general characteristics and are categorized under a single title for administrative purposes. As such, a job class is not meant to be all-inclusive of every task and/or responsibility.

State of Connecticut

Transportation Maintainer 3 (40 Hour)(Over-the-Fence Mower Operator)

<h4>Introduction</h4> The&nbsp;State of ConnecticutDepartment of Transportation&nbsp;(DOT), is now accepting applications for a Transportation Supervising Engineer (Engineering) role within the Hydraulics and Drainage section in the Division of Bridges, Bureau of Engineering and Construction, at our Headquarters in Newington, CT. WHAT WE CAN OFFER YOU <ul><li>Visit our&nbsp;newState Employee Benefits&nbsp;Overview&nbsp;page!&nbsp;</li><li>A healthy&nbsp;work-life balance&nbsp;to all employees</li><li>Professional growth and development opportunities</li><li>Work for a Forbes top company -&nbsp;‘Forbes’:&nbsp;State of Connecticut Ranked One of the Best Employers of 2023&nbsp;- State of CT Receives National&nbsp;Recognition for Offering Job Growth, Competitive Benefits, and Flexible Schedule</li><li>CTDOT has been recently awarded the Employer of the Year award by the Connecticut Society of Civil Engineers&nbsp;(CSCE)&nbsp;and named the Women’s Transportation Seminar&nbsp;(WTS)&nbsp;CT Employer of the Year for 2024!</li></ul> POSITION HIGHLIGHTS <ul><li>Full Time, 40 hours per week</li><li>Monday through Friday, 1st shift</li><li>Location: DOT Headquarters in Newington, CT</li><li>P-4 (Engineering and Scientific)&nbsp;bargaining unit</li><li>Hybrid (office/telework) may be available</li></ul> THE ROLE The Transportation Supervising Engineer (TSE) is responsible for the supervision of engineering staff of the Hydraulics and Drainage section, maintaining schedules, planning and overseeing assignments, setting priorities, and reviewing and approving assigned work. The TSE provides staff training, technical and procedural assistance on assignments and conducts performance evaluations. Engineers in the Hydraulics and Drainage (H&amp;D) section: <ul><li>Provide specialized engineering, technical support; and policy advice on all stormwater and water resource management issues related to the planning, permitting, design, construction, and maintenance of transportation facilities,</li><li>Perform hydrologic and hydraulic modeling, hydraulic design and/or review of storm drainage systems, culverts, highway or railroad bridges over waterways, detention facilities, dams, and related hydraulic structures,</li><li>Perform bridge scour analysis, prepare revetment and scour countermeasure design and assist with bridge scour monitoring,</li><li>Prepare flood management certifications and other permit documentation,</li><li>Provide design support and technical advice to other Department units on hydraulic and drainage activities associated with the design and/or maintenance of transportation facilities,</li><li>Review commercial development proposals brought before the Office of State Traffic Administration and district permit offices.</li></ul> Transportation Supervising Engineers also assist other Department operating units, consulting engineers, municipalities, and other outside officials and agencies by: <ul><li>developing and/or making recommendations on design standards</li><li>providing highly technical assistance in conducting studies or establishing policy, procedures, or methods</li><li>preparing reports, recommendations and correspondence</li><li>supervising office functions for design projects</li><li>supervising preparation of comprehensive technical reports and related correspondence</li><li>making oral presentations at public information meetings and hearings</li><li>reviewing work of consultants (engineers, designers, etc.)</li></ul> APPLICATION DETAILS Please list your Driver's license number, expiration date, and issuing State, Professional Engineer (PE) license number and expiration date, if applicable, and any other job-relevant licenses or certifications you hold in the Licenses and Professional Certifications section of your application. POSITION REQUIREMENTS <ul><li>This position requires active Professional Engineer (PE) licensure from the Connecticut Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S.§20-302.</li><li>Applicants must be available to travel to and attend trainings, conferences, public meetings, field reviews, etc., both within and outside of normal working hours, when necessary. A valid driver’s license is required and must be maintained.&nbsp;</li></ul> ABOUT US As one of Connecticut’s largest State agencies, DOT employs approximately 3,200 individuals statewide in five bureaus. It is our mission to provide a safe, accessible, and efficient multimodal transportation network that improves the quality of life and promotes economic vitality for the State and the region. We have a significant transportation infrastructure system that is essential to maintaining mobility for Connecticut residents and businesses and supporting economic and community development while preserving environmental and cultural resources. The Department of Transportation is committed to cultivating a diverse staff that is representative of the communities we serve. Applications from individuals having diverse backgrounds and life experiences are strongly encouraged. Watch the video below to see what it's like to be a Transportation Supervising Engineer at the CTDOT!&nbsp;&nbsp; <h4>Selection Plan</h4> To Apply: <ul><li>In order to be considered for this job opening&nbsp;you must meet the Minimum Qualifications as listed on the job opening.&nbsp;&nbsp;You must specify your qualifications on your application.</li><li>The minimum experience and training requirements must be met by the close date on the job opening, unless otherwise specified.</li><li>In order to receive educational credits toward qualification for this job posting, the institution must be accredited.&nbsp; If the institution of higher learning is located outside of the U.S., you are responsible for providing documentation from a recognized USA accrediting service which specializes in determining foreign education equivalencies to the individual listed on this job posting.</li><li>Ensure that your application is complete and detailed before submitting it. In order to comply withPublic&nbsp;Act 21-69,&nbsp;the State of Connecticut is no longer asking for resumes during the initial application process. You will not be able to make revisions once your application is submitted into the JobAps system.</li><li>Please select all location(s) and shift(s) you are willing to work on your application. Failure to do so may result in not being considered for vacancies in that specific location or shift.</li><li>All application materials must be received by the recruiting agency by the time specified on the job opening for the position for which you are applying. Late applications may not be submitted and will not be considered. Exceptions are rare and limited to documented events that incapacitate a candidate during the entire duration of the job posting time period. It is the candidate’s obligation and responsibility to request an exception and provide a legally recognized justification to accommodate such exception. Requests should be made <a href="mailto:toDAS.SHRM@ct.gov" target="_blank">toDAS.SHRM@ct.gov</a>.</li><li>For current state employees, salary calculations are not necessarily comparable from three branches of state government (i.e., Executive, Legislative, Judicial) to the&nbsp;other.&nbsp;&nbsp;</li></ul> FOR ASSISTANCE IN APPLYING: <ul><li>Pleaseread&nbsp;or&nbsp;watch&nbsp;our&nbsp;Applicant Tips on How to Apply!</li></ul> Important Information After You Apply: <ul><li>This posting may require completion of additional referral questions (RQs). You can access these RQs via an email that will be sent to you after the posting's closing date or by visiting your JobAps Personal Status Board (Certification Questionnaires section). Your responses to these RQs must be submitted by the questionnaire's expiration date. Please regularly check your email and JobAps Personal Status Board for notifications. Please check your SPAM and/or Junk folders on a daily basis in the event an email provider places auto-notification emails in a user's spam.</li><li>Read through this helpful link to&nbsp;prepare for your interview.&nbsp;</li><li>Although applicants will receive correspondence via email, as a backup they are also encouraged to sign on to their Personal Status Board on a daily basis to monitor their status, view all emailed notices and complete tasks required in the recruitment process.</li><li>Note: At any point during the recruitment process, applicants may be required to submit additional documentation which support their qualification(s) for this position. These documents may include: a cover letter, resume, performance reviews, attendance records, supervisory references, licensure, etc., at the discretion of the hiring agency.</li><li>Interviews will be limited to candidates whose experience and training most closely meet the requirements of the position.</li><li>The immediate vacancy is listed above, however, applications to this&nbsp;recruitment may be used for future vacancies in this job class in the next twelve (12) months.</li><li>Candidates who are offered and accept a position with the State of Connecticut are bound&nbsp;by the State Code of Ethics for Public Officials and State Employees which is available at<a href="http://www.ct.gov/ethics" target="_blank">www.ct.gov/ethics</a>.</li></ul> Connect With Us: Due to the large volume of applications received, we are unable to provide confirmation of receipt or status during the recruitment process. Updates will be available through your JobAps portal account. Should you have any questions pertaining to this recruitment, please contact&nbsp;Sharon McIntosh,&nbsp;at&nbsp;<a href="mailto:Sharon.McIntosh@ct.gov" target="_blank">Sharon.McIntosh@ct.gov</a>. Follow the State of Connecticut&nbsp;on&nbsp;LinkedIn. <h4>PURPOSE OF JOB CLASS (NATURE OF WORK)</h4> In the Department of Transportation and Connecticut Airport Authority this class is accountable for supervising engineers and other staff engaged in engineering and/or related tasks in one or more aspects of transportation engineering projects or studies in the areas of administration, bridge design, design, drainage, electrical, foundations, hydraulics, maintenance, operations, pavement management, regulation compliance, rehabilitation, research, traffic or utilities. <h4>EXAMPLES OF DUTIES</h4> <ul><li>Supervises work of engineers, technicians and other technical and/or clerical personnel in any one of several organizationally specialized engineering operations, railroad or airport sections;&nbsp;</li><li>Reviews detailed plans, specifications or studies of complex engineering problems related to areas such as highway, bridge, facility or geometric design, traffic engineering, computer applications, electrical engineering, highway operations, geo-technical engineering, hydraulics and drainage, utilities, contract and project development, environmental compliance, railroad engineering or airport engineering;&nbsp;</li><li>Supervises research into development of improved materials or products and testing methods;&nbsp;</li><li>Supervises field and office research projects on engineering and technical problems;&nbsp;</li><li>Supervises research on economic, financial and administrative aspects of pavement management, highway construction and maintenance, design of highways and bridges with reference to materials to be used and in pavement work correction, resurfacing and winter maintenance techniques;&nbsp;</li><li>Coordinates design related elements of construction projects;&nbsp;</li><li>Prepares special reports, cost estimates, standards and specifications and fee schedules for consultant engineers, surveyors or contractors;&nbsp;</li><li>Reviews progress reports;&nbsp;</li><li>Schedules, assigns, oversees and reviews work of staff;&nbsp;</li><li>Provides staff training and assistance;&nbsp;</li><li>Conducts performance evaluations;&nbsp;</li><li>Determines priorities and plans section work;&nbsp;</li><li>Establishes and maintains section procedures;&nbsp;</li><li>Develops or makes recommendations on policies and standards;&nbsp;</li><li>Acts as liaison with other operating sections, agencies and outside officials;&nbsp;</li><li>Prepares reports, recommendations and correspondence;&nbsp;</li><li>Conducts analytical studies of engineering costs incurred to determine amounts reimbursable under federal aid and amounts due public utilities under state and federal policies;&nbsp;</li><li>Prepares comprehensive reports on fiscal matters relating to departmental engineering operations;&nbsp;</li><li>Directs concurrent billing programs for department;&nbsp;</li><li>Acts as an assistant in performing highly specialized administrative or engineering studies;&nbsp;</li><li>Supervises or provides highly technical assistance in conducting studies or establishing policy, procedures or methods;&nbsp;</li><li>Supervises field or office functions for location, boundary, construction surveying and design projects;&nbsp;</li><li>Supervises preparation of comprehensive technical reports and related correspondence;&nbsp;</li><li>Makes oral presentations at public hearings or meetings;&nbsp;</li><li>Reviews work of consultants (engineers, designers, etc.);&nbsp;</li><li>Acts as the Primary Assistant to the Chief Engineer in performing special projects and overseeing Bureau activities;&nbsp;</li><li>Oversees the Department's Consultant Selection Panel process;&nbsp;</li><li>Serves as a member of departmental committee assisting in preparation and/or revision of standard specifications;&nbsp;</li><li>Performs related duties as required.</li></ul> <h4>KNOWLEDGE, SKILL AND ABILITY</h4> <ul><li>Considerable knowledge of <ul><li>principles and practices involved in transportation engineering such as bridge design, foundations, highway design, transportation facilities design, transportation planning, drainage or hydraulics, research, pavement design, pavement management, traffic and utilities;&nbsp;</li><li>administrative and financial controls with respect to transportation engineering plans, contracts, projects and reports;&nbsp;</li><li>relevant agency policies and procedures;&nbsp;</li><li>relevant state and federal laws, statutes and regulations;&nbsp;</li><li>departmental operational methodologies;&nbsp;</li><li>latest engineering principles, techniques and procedures employed in engineering field;&nbsp;</li></ul></li><li>Considerable <ul><li>interpersonal skills;&nbsp;</li><li>oral and written communication skills;</li></ul></li><li>Considerable ability to <ul><li>analyze and review engineering reports, plans and specifications;&nbsp;</li><li>interpret and apply principles of information systems and technologies;&nbsp;</li></ul></li><li>Supervisory ability.</li></ul> <h4>MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE</h4> Eight (8) years of experience in transportation engineering. <h4>MINIMUM QUALIFICATIONS - SPECIAL EXPERIENCE</h4> One (1) year of the General Experience must have been as an engineer with lead responsibility for complex transportation engineering projects in bridge design, drainage, electrical, foundations, traffic, facilities design, highway design, research, utilities or hydraulics.&nbsp; NOTE: For state employees this experience is interpreted at the level of a Transportation Engineer 3 (Engineering). <h4>PREFERRED QUALIFICATIONS</h4> <ul><li>Possession of an accredited bachelor’s or master’s degree in civil engineering with course work relevant to the field of hydraulic and/or water resources engineering</li><li>Experience supervising, evaluating, mentoring, assigning work and developing improved performance of lower-level engineers</li><li>Experience utilizing knowledge of hydrologic and hydraulic engineering as it applies to transportation projects</li><li>Experience applying the latest techniques and procedures employed in the field of hydraulic engineering, including hands-on experience in watershed and hydraulic modeling using state-of-the-art computer software</li><li>Experience performing bridge scour evaluations, preparing scour estimates/calculations, NBI ratings, slope protection (revetment), and scour countermeasure designs and scour reports</li><li>Experience analyzing problems, reading plans, and interpreting reports related to hydraulics, bridge scour, drainage, flooding, flood management, and recommending effective solutions as a retrofit or as part of a proposed project design</li><li>Experience showcasing knowledge and understanding of the Connecticut General Statutes (CGS) and Regulations Connecticut State Agencies relating to Flood Management Certification and other water resource permitting administered by Connecticut Department of Energy and Environmental Protection (CTDEEP)</li><li>Hands-on experience working with FEMA Flood Insurance Studies (FIS), mapping and technical data for the development of regulatory floodplain/floodway models for compliance with state flood management and NFIP regulations</li><li>Experience analyzing problems and recommending effective solutions for hydraulics and drainage related issues</li><li>Experience preparing technical memoranda, letters, reports, and other documents</li><li>Experience using Office365, Microsoft Project, CTDOT’s Compass, Bluebeam and other discipline-related applications&nbsp;</li><li>Experience with project management tasks including organization, document control, and management of project deadlines</li><li>Experience demonstrating effective verbal and written communication skills</li><li>Experience leading people and managing tasks, including influencing staff in higher level positions, to achieve common goals</li><li>Experience working independently, being self-motivated, and taking ownership of assignments</li></ul> <h4>SPECIAL REQUIREMENTS</h4> <ul><li>Incumbents must possess Professional Engineer (PE) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S.§20-302.</li><li>Incumbents in this class may be required to possess and retain a valid Motor Vehicle Operator’s license.</li><li>Incumbents in this class may be required to travel.</li></ul> <h4>Conclusion</h4> AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities. <h4>ACKNOWLEDGEMENT</h4> As defined by Sec. 5-196 of the Connecticut General Statutes, a job class is a position or group of positions that share general characteristics and are categorized under a single title for administrative purposes.&nbsp; As such, a job class is not meant to be all-inclusive of every task and/or responsibility.

Transportation Supervising Engineer (Engineering)(Hydraulics and Drainage)

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician

Dialysis Patient Care Technician - PCT Chronic In-center

Dialysis Patient Care Technician - PRN

Dialysis Patient Care Technician PRN - PCT Chronic In-center

Title Maintenance Mechanic&nbsp; About the Organization Concern Housing is a non-profit agency committed to helping individuals and families to live in the community with dignity and enhanced opportunities through the provision of housing and support services. We are one of the largest housing agencies of this kind in New York State, currently serving approximately 1,300 individuals and families in over 240 locations. Concern offers a variety of housing options with individualized support services designed to support personal growth and independence. Our workplace culture thrives by embracing diversity and rewarding innovative ideas. Diversity at our agency means fostering a workplace in which individual differences are recognized, appreciated, respected and responded to in ways that fully develop and utilize each person's talent and strengths.&nbsp; Position Maintenance Mechanic&nbsp; Full-Time/Part-Time Full-Time&nbsp; Location Ronkonkoma&nbsp; Salary $50,000/yr.&nbsp; Days/Hours Monday-Friday; 8am-4pm &nbsp; Description Concern Housing is seeking a Maintenance Mechanic who will be&nbsp;responsible for the day-to-day maintenance needs of Concern’s various locations and general upkeep of the agency’s property.Responsibilities Include but are not limited to:<ul><li>Performs a variety of work in the maintenance and repair of buildings and grounds at various facilities/sites including carpentry, minor electrical, plumbing, masonry, painting, cleaning, yard care; &nbsp;repairs and treats structures such as floors, showers, sinks, walls, carpets; repairs door hinges; changes filters on systems, services appliances, reports malfunctions to supervisor; moves and assists in moving furniture and equipment at various facilities/sites; exercises discretion in identifying projects requiring the services of higher skilled crafts person; maintains clean, safe and orderly work areas.</li><li>Required to be available for overtime hours as needed and as directed by Supervisor</li><li>Performs maintenance tasks as directed by the Maintenance Director and Maintenance Supervisor and Property Manager</li><li>Responsible for the care of tools and equipment being used in performing tasks.</li><li>Remain current with all Agency required compliance documents and trainings.</li><li>Performs other related duties as assigned.</li></ul> Salary: $50,000/yr. &nbsp; Position Requirements High School Diploma or equivalent preferred, plus experience and demonstrated ability. Concern Housing offers a generous benefit package which includes; Medical Insurance (Agency pays 80% of the premium), Affordable Voluntary Dental and Vision Insurance, Flexible Spending Accounts, Agency Sponsored Retirement Plan, Employee Sponsored 403(b) Retirement Plan, Agency Sponsored Life Insurance Coverage and an Excellent Paid Time Off Package. Concern encourages employee growth, offering Educational Assistance and Scholarship Programs, Licensure Reimbursement and Possible Internship/Clinical Supervision. Referral Bonuses are also available!&nbsp; EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law.&nbsp; This position is currently accepting applications. Apply Now

Concern Housing

Maintenance Mechanic

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.Pay Range$76,300.00-$104,900.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. &nbsp; Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.&nbsp;Position Overview:&nbsp; The purpose of the Process Engineering Technician role is to maintain and improve the manufacturing processes of Johns Manville’s facility.&nbsp; The Process Engineering Technician / Production Maintenance Coordinator will drive continuous improvements in productivity and quality by driving better equipment reliability and improvements in production standard work.&nbsp;Your Day-to-Day:<ul><li>Owns and drives improvements in AC&amp;R process in production</li><li>Works with maintenance to prioritize and schedule work to meet mat department performance goals</li><li>Owns production PM system including planning of PM activities, writing SOPs/ PMs, directing outside contractor work, assist production supervisor with directing PM work as needed</li><li>Coordinates between maintenance and production for scheduling and communication of work</li><li>Owns TPM/ Operator Basic Care driving improvements in uptime</li><li>Drives improvements in Equipment Reliability for continuous improvement in productivity, yield, uptime and quality</li><li>Writes MOCs and completes safety/ line improvement projects</li><li>Owns and drives improvement in Production Preventative Maintenance System</li><li>Owns and drives improvement in Production Wear Items Cost/ Performance</li><li>Coordinates with outside contractors to execute improvement projects</li><li>Executes improvements projects</li><li>Troubleshoot and correct process / equipment problems</li><li>Help implement standardized processes for continuous improvement of productivity, yield, uptime and quality</li><li>Assist in maintaining a safe work environment</li><li>Assist in statistical methods and Design of Experiment (DOE) trials to optimize operating parameters and quantify improvements</li><li>Aid with research, approval and implementation of equipment, product and process improvement efforts</li><li>May be required to perform other related duties as assigned</li></ul>What You Bring to the Team:<ul><li>Associate’s degree, High School or Technical School diploma with a minimum of 3 years continuous operations manufacturing work experience</li><li>Working knowledge of Lean manufacturing and equipment optimization preferred</li><li>Ability to identify, prioritize and direct production and maintenance operations for day-to-day and long-term production improvement preferred</li><li>Solid project management skills preferred</li><li>May be required to further education in technical functions such as electrical, chemical, mechanical or other engineering disciplines</li><li>Working knowledge of SOP/monitor and setting process perimeters</li><li>Strong analytical skills and demonstrated mechanical aptitude</li><li>Proven ability to lead, plan, organize, prioritize, and manage multiple projects</li><li>Strong interpersonal, verbal, and written communication skills</li><li>Fundamental understanding of distributed control systems</li><li>Proficient in Microsoft Word, Excel, PowerPoint, Outlook and Access</li><li>Ability to interface at all levels of the organization, both internally and externally</li><li>Demonstrated focus on safety</li><li>Proven ability to set direction for supervised employees</li></ul><ul><li>Minimal travel required (0 – 10 days per year).</li></ul><ul><li>Work environment is typical of a manufacturing facility:&nbsp; May be exposed to environmental conditions of cold, heat, high noise levels, moving mechanical parts, heights, dust/mist/gas/fumes, extensive walking or climbing, etc.</li><li>May be required to lift, carry, push or pull up to and including 25 pounds.</li></ul>Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

1, 089 Technician Jobs