field_job_employment_type

job_industry

field_job_occupational_field_parents_all

field_job_experience

job_organization_name

07-Nov-2024<h4>Animal Technician I</h4>Faculty of Arts and Sciences 67330BRJob SummaryExplore an Animal Care Career at Harvard University Cambridge where our animal care programs commitment to excellence in research is unparalleled. You would be working in a state-of-the-art award-winning rodent animal facility. The benefit package at Harvard is exceptional including degree through the extension school.Position DescriptionPerform animal husbandry duties in a complex research environment. Responsible for daily care of various species of laboratory animals including feeding, watering, health observations, and changing and washing cages as assigned. Specific duties and responsibilities include, but are not limited to:<ul><li>Feed, water, and care for animals categorized as Biosafety Level 1 or 2 and/or administered hazardous chemicals;</li><li>Maintain animal rooms and facility in a clean and organized manner;</li><li>Administer special diets and water for research or veterinary purposes;</li><li>Perform treatments and assist research and veterinary staff as instructed;</li><li>Maintain accurate and legible documentation and records as needed;</li><li>Identify and report signs of animal illness, injury, and other abnormalities to appropriate personnel;</li><li>Prepare appropriate chemicals to sanitize and disinfect animal rooms, equipment, shipping containers, etc.;</li><li>Assist in animal quarantine and health monitoring programs;</li><li>Receive and house new animals while maintaining necessary paperwork and documentation;</li><li>Conduct animal census as needed;</li><li>Euthanize animals as directed;</li><li>Monitor and ensure availability of animal care supplies, food, bedding, chemical supplies, and equipment;</li><li>Assist with daily operation and coordination of cage wash as needed;</li><li>Rotate with co-workers to coordinate routine team tasks;</li><li>Participate in continuing improvement projects and departmental committees;</li><li>Participate in writing and updating pertinent Standard Operating Procedures (SOP's);</li><li>Assist with training co-workers to perform tasks according to those SOP's;</li><li>Comply with applicable federal, state, and municipal laws and regulations, institutional policies and accreditation standards for the humane care and use of laboratory animals;</li><li>Other projects, duties, and responsibilities as assigned.</li></ul>Basic QualificationsDiploma from an accredited high school or GED.Additional Qualifications and SkillsThe successful candidate will also have:<ul><li>Clear understanding and knowledge of methods, materials, and equipment used in animal care activities;</li><li>Knowledge of animal research and breeding procedures and practices;</li><li>Knowledge of rodent quarantine, health monitoring programs, and other related procedures;</li><li>Ability to follow departmental policies and standard operating procedures (SOPs) in a reliable and safe manner;</li><li>Basic proficiency with digital technology, including Microsoft Office and iPhones or their equivalents;</li><li>Ability to communicate effectively in written and spoken English;</li><li>Enthusiasm for working in a team-based culture;</li><li>Respect for others and compassion for animals.</li></ul>Physical Requirements<ul><li>Able to lift up to 25 pounds with frequent lifting, pushing, pulling and/or carrying of objects weighing up to 25 pounds.</li><li>Able to push and pull heavy equipment on wheels.</li><li>Able to walk or stand for up to an entire eight-hour shift, excluding scheduled breaks.</li><li>Able to perform repetitive motions over extended periods of time.</li><li>Able to perform in a workplace environment with exposure to animals, animal dander, animal byproducts, and bedding materials for prolonged periods of time.</li><li>An occupational health screening and permission by the employer's occupational medicine service to work with animals.</li></ul>Working Conditions<ul><li>This position is 100% on-site. Remote work is not possible.</li><li>The health of our workforce is a priority for Harvard University. With that in mind, we strongly encourage all employees to be up-to-date on CDC-recommended vaccines.</li></ul>Additional Information<ul><li>American Association for Laboratory Animal Science (AALAS), Assistant Laboratory Animal Technician (ALAT) certification required within 15 months of start date.</li><li>Please note, this position will be hired at either a grade 47 or grade 48, dependent on the certification level of the successful applicant.</li><li>This position will work a Tuesday through Saturday schedule, 6:30am - 3:00pm.</li><li>The position is considered essential and may be required to report to work during school closures, inclement weather, and/or other emergencies.</li><li>Working during holidays required on a rotating schedule. Other overtime may also be required.</li></ul>All formal written offers will be made by FAS Human Resources.We regret that Harvard University does not provide visa sponsorship for this position.We invite individuals with diverse backgrounds, experiences and abilities to be a part of our community.Work Format DetailsThis position is based on-campus, in Massachusetts. This may include in-person during emergency situations (if applicable). Additional details will be discussed during the interview process.BenefitsWe invite you to visit Harvard's Total Rewards website (<a href="https://hr.harvard.edu/totalrewards" target="_blank">https://hr.harvard.edu/totalrewards</a>) to learn more about our outstanding benefits package, which may include: <ul><li>Paid Time Off: 3-4 weeks of accrued vacation time per year (3 weeks for support staff and 4 weeks for administrative/professional staff), 12 accrued sick days per year, 12.5 holidays plus a Winter Recess in December/January, 3 personal days per year (prorated based on date of hire), and up to 12 weeks of paid leave for new parents who are primary care givers.</li><li>Health and Welfare: Comprehensive medical, dental, and vision benefits, disability and life insurance programs, along with voluntary benefits. Most coverage begins as of your start date.</li><li> Work/Life and Wellness: Child and elder/adult care resources including on campus childcare centers, Employee Assistance Program, and wellness programs related to stress management, nutrition, meditation, and more.</li><li>Retirement: University-funded retirement plan with contributions from 5% to 15% of eligible compensation, based on age and earnings with full vesting after 3 years of service.</li><li>Tuition Assistance Program: Competitive program including $40 per class at the Harvard Extension School and reduced tuition through other participating Harvard graduate schools.</li><li>Tuition Reimbursement: Program that provides 75% to 90% reimbursement up to $5,250 per calendar year for eligible courses taken at other accredited institutions.</li><li> Professional Development: Programs and classes at little or no cost, including through the Harvard Center for Workplace Development and LinkedIn Learning.</li><li>Commuting and Transportation: Various commuter options handled through the Parking Office, including discounted parking, half-priced public transportation passes and pre-tax transit passes, biking benefits, and more.</li><li> Harvard Facilities Access, Discounts and Perks: Access to Harvard athletic and fitness facilities, libraries, campus events, credit union, and more, as well as discounts to various types of services (legal, financial, etc.) and cultural and leisure activities throughout metro-Boston.</li></ul>Job FunctionResearch Department Office LocationUSA - MA - Cambridge Job Code403090 Animal Technician I Work FormatOn-Site Sub-UnitSciences Salary Grade047DepartmentOffice of Animal ResourcesUnion55 - Hvd Union Cler &amp; Tech Workers Time StatusFull-time Pre-Employment ScreeningCriminal, Education, IdentitySchedule40 hours per week.&nbsp;This position will work a Tuesday through Saturday schedule, 6:30am - 3:00pm.Commitment to Equity, Diversity, Inclusion, and BelongingHarvard University views equity, diversity, inclusion, and belonging as the pathway to achieving inclusive excellence and fostering a campus culture where everyone can thrive. We strive to create a community that draws upon the widest possible pool of talent to unify excellence and diversity while fully embracing individuals from varied backgrounds, cultures, races, identities, life experiences, perspectives, beliefs, and values.EEO StatementWe are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identity, sexual orientation, pregnancy and pregnancy-related conditions, or any other characteristic protected by law.LinkedIn Recruiter Tag (for internal use only)#LI-KO1

Harvard University FAS Human Resources

Animal Technician I

<a>Howmet Aerospace</a>, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications. Summary: Howmet Structure Systems has an immediate opening for a Electrical Maintenance Technician located at our Niles Facility. This position is responsible for assisting in the maintenance operation and preventative maintenance of manufacturing equipment within the plant. Essential Duties and Responsibilities: This is not an exhaustive list of responsibilities; it is intended to provide a representative summary of the major duties and responsibilities of a Mechanical Maintenance Technician. Primary Function: To inspect, repair, replace, adjust, install, wire and maintain all electrical and electronic equipment in the plant or assigned area including power transmission lines transformers and related equipment. Make mechanical repairs as required in connection with electrical service. Tools and Equipment: Wiring diagrams, drawings, electrical and electronic tools, gauges, calibrative and testing equipment, hand tools, drill press, hand grinder, commutator and bench lathe, electrical drills, power hack saw, wire stripper, pipe threading machine, burning and welding equipment, soldering iron, pipe bender, bock and tackle, measuring tools, ect. Materials: A.C. and D.C motors and generators, transformers, rectlflers, electronic controls and regulator: various mill electrical equipment, power disruption and control circuits, electronic computing and controls systems, various types of instruments, data recording and processing equipment, control panels and circuits, electronic gauges and detectors, industrial T.V., public address systems, condensers, pumps, fans, poles, hardware, cable wire, conduit and fittings, lighting fixtures, repair and replacement parts, lubricants, ect. Working Procedures: <ul><li>Receives verbal or written instruction covering the scheduling and emergency repair and installation and inspection work to be done.</li><li>Analyzes all types of circuits and wiring diagrams to modify, service, install or repair all types of electronic devices and systems, various mill electrical equipment, electronic computing and controls systems, power and distributing control equipment, measuring, recording, processing and control devices, indication devices, instruments and gauges.</li><li>Fabricates parts as required using machine and hand tools common to the trade. Burns, brazes, solders and performance simple layout, fabrication and welding in the servicing of electrical and electronic equipment, including related piping and mechanical component.</li><li>Makes either temporary or permanent repairs or adjustments to equipment such as main motor drives, generators, control panels, relays, controllers, switchboards, circuit breakers, lighting circuits, resistors, etc.</li><li>Install and repairs conduit, splicers, and insulates wires and cables, making splices on hot lines, isolates circuits for repairs.</li><li>Maintains integrating, indicating, or graphic electrical or mechanical instruments.</li><li>&nbsp;Makes mechanical repairs are required in connection with the servicing of electrical and electronic equipment including cranes.</li><li>Advises when faulty equipment should be shut down for repairs.</li><li>Tests, repairs and/or adjusts electronic scales to correct any variation from accuracy.</li><li>Test, repairs and adjust electrical meters, such as osillograph, tachometers, ampmeter, voltmeter, power factory meters, phase shifter, etc.</li><li>Cleans, paints, and lubricates equipment such as bearings, lights, reflectors, switch boxes, controls, pumps, compressors, fans, ect.</li><li>Installs, repair and maintains power transmission lines, transformer, high tension sub station equipment such as disconnects, switch gear, bushings, insulator slings, lighting arrestors, phase wire grounding equipment.</li><li>Assists other maintenance or operating personal in repair work as required.</li><li>Fills out reports of maintenance work performed, parts and materials used, inspections made, etc.</li><li>Operates cranes, machinery, mobile equipment, hydraulics lifts; erects and dismantles pepe scaffolds and performs necessary rigging duties in connection with the servicing of electrical and electronic equipment.</li><li>Maintains a safe, clean&nbsp;and orderly conditions of work area and equipment.</li></ul> The above statements reflect the general details considered necessary to describe the principal functions of the job identified and shall not be constructed as a detailed description of all the work requirements that may be inherent in the job. *Qualifications for Internal Candidates Must have completed a recognized, appropriate apprenticeship or have at least eight (8) years of relevant on-the-job industrial electrical experience, to include digital electronics, PLC’s, combustion, and instrument repair, or a two (2) year degree in Electrical Engineering Technology (or equivalent) with two (2) years of relevant on-the-job industrial electrical experience. High School diploma or GED Ability to work in a manufacturing atmosphere safely and follow safety practices and regulations; Must be willing and able to work any shift &nbsp;in a 24/7 operation and overtime including weekends and holidays; Ability to lift at least 50lbs as needed; Must have basic computer skills to create work orders, complete work orders, plan work, identify parts, and locate spare parts using a computerized maintenance management system after training; Must be able to legally operate company motor vehicles and mobile equipment; Must have strong math skills including reading fractions and decimals; Must have strong troubleshooting skills; Basic welding and flame cutting experience with a basic understanding of hydraulics and pneumatics. The position requires an individual to stand, climb, work at heights, stoop, move equipment; bend, reach, or lift for prolonged periods of time. PPE includes FR9 clothing, safety glasses, hard hat, and steel toed boots with metatarsal protection, hearing protection and other safety equipment as required. Qualified candidates must be able to pass a background test, physical&nbsp;and drug screen. <ul><li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Maintenance Technician – Electrical

Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking a&nbsp;Maintenance Repair A&nbsp;to join our&nbsp;Howmet Casting plant in Dover, New Jersey. The work hours for this Afternoon Shift are Monday - Friday 2:30p - 11.00p. Training will occur on Day Shift Monday - Friday 6:30A - 3.00P New Hire Starting Hourly Rate:&nbsp;$33.57; After 12 Months:&nbsp;$36.15. Position will receive an hourly "shift premium" while assigned to an off-shift. $2500 Sign on Bonus payable after 90 days of employment&nbsp;(Sign on Bonus for external candidates&nbsp;only) Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. Position Overview&nbsp; Makes repairs and does preventative maintenance on facility and manufacturing equipment. Essential Job Functions • &nbsp;Assists Senior Maintenance in maintaining plant mechanical and building equipment. • &nbsp;Installs piping and mechanical equipment as directed. • &nbsp;Able to trouble shoot and repair all routine mechanical failures or malfunctions and acquire some knowledge of hydraulic and pneumatic systems. • &nbsp;Assists in construction and/or repair of all plant equipment. • &nbsp;Keeps records as required. • &nbsp;Must be able to perform the duties of a B Maintenance Mechanic • &nbsp;Performs other duties as assigned by supervision. • &nbsp;Maintain all assigned work areas in as clean, orderly and safe condition as circumstances permit. EHS Requirements • &nbsp;Expected to assist in the implementation of EHS Values and policy statements and accompanying principals. • &nbsp;Comply with all department, facility, corporate and regulatory EHS regulations. • &nbsp;Wear all required personal protective equipment (PPE). • &nbsp;Report all job-related illness and injuries (Per Employee Handbook). • &nbsp;Report all safety, health and environmental concerns to your supervisor in a timely manner. • &nbsp;Attend all EHS training. BASIC QUALIFICATIONS <ul><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li><li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.</li><li>High School Diploma or GED from an accredited institution.</li><li>Requires 4 years of work experience in a Manufacturing Environment in a mechanical role&nbsp;or related experience.</li></ul> PREFERRED QUALIFICATIONS <ul><li>Ability to communicate effectively (verbal and written)</li><li>Must be able to work flexible hours including night and weekends with little advanced notice.</li><li>Working towards acquiring a boiler operation license. Will be required to have a boiler license after 1 year of employment</li></ul> Other Skills/Abilities <ul><li>Familiar in repairs and location of plant air compressors, natural gas and propane systems, sprinkler valves, etc., water systems (city, well and tower boilers)</li></ul> Physical Demands <ul><li>Frequent lifting, pushing pulling and standing in a manufacturing environment</li><li>Requires the use of a face shield and respirator at times</li><li>TOOLS - Lathe, Welder, Miller, Grinders, Small hand tools and safety equipment, Computers, Vacuum leak detector</li></ul> Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Maintenance Mechanic A - 2nd Shift (Casting)

<h4>Automation Maintenance Technician II</h4>Time type: full timePosted on: November 06, 2024Job requisition id: R4184What we needSymbotic is seeking an Automation Maintenance Technician II will repair and calibrate our automated and robotic systems. These systems are Symbotic’s Automated Adapters, Vertical Lifts, and Symbotic’s fleet of automated robotic vehicles. An Automation Maintenance Technician will become the system expert of Symbotic’s automation, including all mechanical, PLC, electrical or electronic subsystems.&nbsp; You will also be responsible for system upkeep and operations of automated adapters used to interface with the Symbotic structure.What we do&nbsp;The Automation Maintenance Technician II is part of the Customer Operations organization which is responsible for leading the day-to-day operations of Symbotic’s robotic material handling system. The Customer Operations organization drives operational excellence by engaging and partnering with our onsite customers to drive best-in-class quality, safety and system performance.What you’ll do<ul><li>Perform inspections on systems associated with Automated Storage and Retrieval System of automated robotic vehicles and Automated Adapters/ Lifts.</li></ul><ul><li>Lead continuous operation by adjusting, calibrating, repairing, replacing or modifying system components.</li></ul><ul><li>Process and monitor the flow of the automated storage and retrieval system, through means of the adapters, including manual inbound, automatic inbound, automatic outbound, to achieve maximum throughput and cases per hour.</li></ul><ul><li>Troubleshoot automated robotic vehicle anomalies and stoppages using schematic and wiring diagrams as well as advanced test equipment.</li></ul><ul><li>Perform periodic system inspections within expected durations on all equipment and thoroughly document all actions and repairs to include parts used and labor. Ensure quality maintenance and complete documentation via the Computerized Maintenance Management System (CMMS).</li></ul><ul><li>Effective communication of production impacting problems and suggested actions, including approximate time required for corrective and emergency maintenance to required team members.</li></ul><ul><li>Must be able to work in a dynamic environment and change course based on immediate business needs.</li></ul><ul><li>Cleanup of equipment and removal of replaced parts from work areas after repairs are completed.</li></ul><ul><li>Responsible for automated robotic vehicle recovery in the Symbotic Matrix select system to include working in restrictive environments.</li></ul><ul><li>Responsible for minor utility work such as machining holes, brackets; cutting steel; aligning sensors; attaching Unistrut; etc.).</li></ul><ul><li>Responsible for troubleshooting, calibration, set up, and tool changes on Robotic arms.</li></ul><ul><li>Responsible for continuous cleaning and adhering to 5S policies.</li></ul><ul><li>Perform Cell Operator functions as needed.</li></ul><ul><li>Other duties as assigned by leadership.</li></ul>What you’llneed&nbsp;<ul><li>Associate degree and/or certification in electronics, automotive, automation, manufacturing or equivalent work experience preferred.&nbsp;</li></ul><ul><li>A minimum of 3years of experience with mechanical automation systems or educational/training equivalent</li></ul><ul><li>Manage and lead advanced troubleshooting skills and ability to follow electro-mechanical diagrams.</li></ul><ul><li>Must be able to operate and run Automated systems</li></ul><ul><li>Experience with PLC (Programmable Logic Controller) knowledge and troubleshooting.</li></ul><ul><li>Advanced troubleshooting skills and ability to follow electro-mechanical diagrams.</li></ul><ul><li>Proficient in performing all Inspection functions.</li></ul><ul><li>Ability to work independently of supervisor following procedures and manuals.</li></ul>Our Environment&nbsp;<ul><li>There will be steep stairs to climb into the structure.&nbsp;&nbsp;</li></ul><ul><li>You will regularly be near railings that are high off the ground.&nbsp;&nbsp;</li></ul><ul><li>Subject to environmental conditions, protection from weather conditions but not necessarily temperature changes. Must be capable of working in temperatures ranging from 105° to 32° Fahrenheit.&nbsp;&nbsp;</li></ul><ul><li>If the site location is in construction, you will be required to wear proper PPE (hard hat, safety vest, steel toes, eyeglasses, ear protection, fall protection (e.g., safety harness).</li></ul><ul><li>Frequent ability to safely and efficiently lift items weighing up to 50lbs and move items weighing up to 80lbs.&nbsp;</li></ul><ul><li>Stand/walk for up to 10-12 hours and is frequentlyrequired to walk and reach with hands and arms.&nbsp;&nbsp;</li></ul><ul><li>The employee is routinely required to work at heights of up to 45 feet and within restrictive areas of 24 inches. to stand; climb or balance and stoop, kneel, crouch, or crawl.&nbsp;&nbsp;</li></ul><ul><li>Must be capable of occasional and/or continuous feeling, seeing, hearing, bending, twisting, stooping, pushing, pulling, balancing, gripping, climbing, crawling, sitting, handling objects, and repetitive movement using both hands and feet. Must comply with all safety requirements and protocols, including without limitation Lock out tag out safety protocols and fall protection safety protocols.&nbsp;&nbsp;</li></ul>#LI-BB1#LI-Onsite Apply Now

Symbotic

Automation Maintenance Technician II

<h4>What The Role Is</h4>Reporting to the Lead Technician, the Solar Technician is responsible for troubleshooting, maintaining, servicing, and repairing solar PV systems and associated equipment. The primary objective is to maintain safe, effective, efficient, and profitable solar PV operation.&nbsp;Pay Ranges by Job Level:Solar Technician I ($54,000 - $77,000)Solar Technician II ($62,000 - $88,000)Solar Technician III ($88,000 - $107,000)<h4>What You'll Be Doing</h4>Level I<ul><li>Assists higher level Technicians in performing maintenance.&nbsp;</li><li>Performs other technical and administrative duties associated with operating and maintaining a power facility.&nbsp;</li><li>Ensures work is performed in accordance with Environmental and Safety requirements.&nbsp;</li><li>Participate in required training, including On-the-Job Training, Self-Study, Computer Based Training and Classroom Training.&nbsp;</li><li>Performs other duties as assigned within the level I scope</li></ul>Level II (Additions)<ul><li>Performs corrective, preventive, and emergency maintenance and operations for which they are qualified to safely and efficiently perform</li><li>Performs work independently and/or in work crews</li><li>Travel required as needed</li><li>Performs other duties as assigned within the level II scope</li></ul>Level III (Additions)<ul><li>Executes routine electrical troubleshooting and repair, instrumentation calibration and troubleshooting</li><li>Performs complex maintenance work such as distributed control systems and inverter troubleshooting as assigned by supervisor based on level of skill and ability</li><li>Complete work orders for the preventive maintenance management system</li><li>Performs corrective, preventive, and emergency maintenance on all PV Solar equipment</li><li>Prepares and implements switching and clearance orders, while working with Operations Center</li><li>Operates all electrical and mechanical PV Solar power plant systems</li><li>Participates in training as required, JHA, PJB, LOTO documentation</li><li>Writes Plant Orders, Plant Procedures, Operating Instructions and other documents as assigned by supervisor</li><li>Ensures work is performed in accordance with Environmental and Safety requirements</li><li>Performs other duties as assigned within the level III scope</li></ul><h4>What You'll Bring</h4>Level I<ul><li>A high school diploma or GED is required or willing to obtain GED within first 6 months of employment.</li><li>Possess demonstrable mechanical aptitude and basic electrical knowledge.</li><li>Understanding of general workplace safety and the ability to follow safety standards, as well as help the company improve upon the standards in place.</li><li>Will drive company vehicle; must have a valid state driver’s license and good driving record.</li><li>Ability to work overtime and non-standard working hours (nights, holidays, weekends), when needed.</li><li>Professionalism and excellent communication skills.</li><li>Ability to operate a computer with technical proficiency of standard business software.</li><li>Knowledge of applicable safety and environmental regulations.</li><li>Able to work both independently and as part of a multi-tasking team.</li></ul>Level II (Additions)<ul><li>1+ years of experience in a power plant or PV Solar O&amp;M/EPC experience</li><li>2+ years of field experience with significant I&amp;E, I&amp;C and/or C&amp;I Electrician experience will be considered in lieu of applicable solar experience</li><li>Demonstrated knowledge of electrical or mechanical fundamentals (single craft journeyman skills) such as electrical measurements, control circuits, and solid state theory application</li><li>Basic knowledge of operational characteristics of equipment and associated control devices installed in power facilities</li><li>Possess demonstrable mechanical aptitude and basic electrical knowledge</li></ul>Level III (Additions)<ul><li>4+ years of PV solar experience is required. I&amp;E, I&amp;C and/or C&amp;I Electrician experience will be considered in lieu of applicable experience.</li><li>Proven experience with a multitude of electrical/construction projects</li><li>Demonstrated knowledge of electrical or mechanical fundamentals (Journeyman skills) such as electrical measurements, control circuits, and solid state theory application</li><li>Knowledge of complex analog and digital instrumentation and control systems</li><li>Proper methods for troubleshooting, repairing, and adjusting instruments and control systems</li><li>Experience administering safe methods to clear equipment, use of tools and plant safety rules</li><li>Understanding reporting procedures and practices and maintenance procedures and practices</li><li>Knowledge of electrical and mechanical prints</li><li>Familiarity with PV Solar plant terminology and nomenclature</li><li>Qualified to perform routine and emergency operations at a solar generation facility and Switchyard</li><li>Able to communicate verbally and in writing and able to work without direct supervision during performance of work</li><li>Able to travel (approximately 5%)</li></ul> <ul><li>If you don’t meet 100% of the above qualifications but see yourself contributing, please submit your resume.</li></ul><h4>What Would Be Nice</h4><ul><li>2-year technical degree or equivalent Journeyman certification/qualifications is preferred</li></ul>Clearway will not sponsor nonimmigrant visas for this position (H-1B, TN, E-3, etc.).The pay rate for the successful candidate will depend on geographic location, skills, relevant and demonstrated experience, education, training and certifications, and other factors permitted by law. This role is eligible to earn an annual cash bonus, subject to personal and company performance goals.Salary Range Across all U.S. Locations$54,000—$107,000 USDClearway Energy Group is leading the transition to a world powered by clean energy. Along with our public affiliate Clearway Energy, Inc., our portfolio comprises approximately 11.4 GW of gross generating capacity in 26 states, including 9 GW of wind, solar, and energy storage assets, and over 2.4 GW of dispatchable power generation providing critical grid reliability services. As we develop a nationwide pipeline of new energy projects for the future, Clearway’s fleet of emissions-free assets generates enough reliable electricity to power more than 2 million homes today. Clearway Energy Group is headquartered in San Francisco with offices in Denver, Houston, Phoenix, Princeton, and San Diego. For more information, visit clearwayenergygroup.com.Clearway Energy, Inc. is one of the largest owners of clean energy generation assets in the US and is leading the transition to a world powered by clean energy. Our portfolio comprises approximately 11.4 GW of gross generating capacity in 26 states, including 9 GW of wind, solar, and energy storage and over 2.4 GW of dispatchable power generation providing critical grid reliability services. Through our diversified and primarily contracted clean energy portfolio, Clearway Energy endeavors to provide our investors with stable and growing dividend income. Clearway Energy, Inc.’s Class C and Class A common stock are traded on the New York Stock Exchange under the symbols CWEN and CWEN.A, respectively. Clearway Energy, Inc. is sponsored by our controlling investor, Clearway Energy Group LLC. For more information, visit investor.clearwayenergy.com.Our Commitment to Diversity, Equity, &amp; Inclusion At Clearway, we create a community that isn’t about being the same – it’s about building a team of unique individuals, with different backgrounds &amp; skill sets, coming together to build something big &amp; make a difference in the world. Clearway’s team is dedicated to a clean energy future across a wide spectrum of roles &amp; responsibilities. Embodying our company values and operating principles, unique individuals come together over a common mission. We embrace opportunities to do challenging work that can change the world. We aspire to bring out the best in everyone. We share setbacks, celebrate successes, &amp; act with integrity &amp; accountability to get the job done. Working at Clearway, Hybrid Together Here at Clearway, we’re committed to balancing flexibility while fostering strong relationships with our teammates. We do this by prioritizing new hires based near one of our offices in San Francisco, San Diego, Scottsdale, Houston, Denver, &amp; Princeton. Our office-based employees typically work together from fabulous spaces on Tuesdays &amp; Thursdays to collaborate &amp; learn, build community, get to know one another, &amp; enjoy company-provided meals &amp; events. Clearway Energy is an equal opportunity employer that values a broad diversity of talent, knowledge, experience &amp; expertise. We intentionally foster a culture of inclusion that empowers our employees to deliver superior performance to the communities we serve. We encourage minorities, women, individuals with disabilities &amp; protected veterans to join the team. Clearway is a proud promoter of employment opportunities to our Military &amp; Veterans. What We Provide Clearway offers all eligible employees working 20+ hours per week a comprehensive menu of benefits: generous PTO, medical, dental &amp; vision care, HSAs with company contributions, health FSAs, dependent daycare FSAs, commuter benefits, relocation, &amp; a 401(k) plan with employer match, a variety of life &amp; accident insurances, fertility programs, adoption assistance, generous parental leave, tuition reimbursement, &amp; benefits for employees in same-sex marriages, civil unions &amp; domestic partnerships. For more on Clearway benefits, visit our Benefits Website.Notice to Applicants Clearway Energy is strongly committed to a philosophy of equal opportunity and fully complies with equal&nbsp;employment&nbsp;laws,&nbsp;ordinances and regulations for all applicants and employees. We will make reasonable accommodations to enable individuals with disabilities to apply and compete for employment opportunities for which they are qualified. If you need a reasonable accommodation because of a disability for any part of the employment process, please send an e-mail to&nbsp;<a href="mailto:recruiting@clearwayenergy.com" target="_blank">recruiting@clearwayenergy.com</a>&nbsp;and let us know the nature of your request and your contact information.Notice to California Applicants Clearway Energy is strongly committed to a philosophy of equal opportunity and fully complies with&nbsp;equal&nbsp;employment&nbsp;laws,&nbsp;ordinances and regulations for all applicants and employees.

Clearway Energy Group

Solar Technician

Join the Clean Energy RevolutionBecomea&nbsp;Automotive Technicianat Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll be performing automotive service duties on Edison's wide-ranging fleet vehicles. As a&nbsp;Automotive Technician, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?Responsibilities<ul><li>You will be lubricating, changing or adding oil.</li><li>Tightening body and chassis bolts; checking and filling brake systems, hydraulic assemblies, differentials and transmissions for proper lubricant and fluid level; replacing such items as filters, belts, hoses, windshield wipers and similar automotive parts.</li><li>Inspecting brake linings and seals; and repairing and rotating tires as necessary; and adjusting brakes.</li><li>Obtain parts, and tools for the mechanic. Maintains records and reports associated with garage operations as required.</li><li>Other vehicle servicing duties as assigned.</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul>Minimum Qualifications<ul><li>Valid US Driver's License.</li><li>Two or more years of experience with advanced automotive and equipment servicing and repair; general use of personal computers and other related diagnostic equipment.</li></ul>Preferred Qualifications<ul><li>An OEM (Ford, General Motors (GM), Toyota, Altec, etc.) Master Technician certification.</li><li>ASE Master Military Tactical Wheeled Vehicle Certification.</li><li>An Associate of Science (AS), Associate of Applied Science (AAS), Associate of Occupational Studies (AOS) in automotive, heavy truck or diesel studies.</li><li>Experience in troubleshooting vehicle service and repair issues.</li><li>Experience operating fueling equipment.</li><li>Experience using pressure equipment to wash and clean vehicles.</li><li>Perform heavy physical labor.</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;on-site. The employee will report to an SCE facility or in the field location.&nbsp; Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li><li>The successful candidate will be expected and must obtain a Master Auto/Light Truck Certification or ASE Master Medium/Heavy Truck Certification, within 18 months of being hired.&nbsp;</li><li>The successful candidate will be expected and must be able to obtain a Class A License with Tanker endorsement within 6 months of being hiring.&nbsp;</li><li>This position will be working 3pm-12am swing shifts.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Automotive Technician

Join the Clean Energy RevolutionBecome&nbsp;a&nbsp;Automotive Technician&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll be performing automotive service duties on Edison's wide-ranging fleet vehicles. As a&nbsp;Automotive Technician, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?Responsibilities<ul><li>You will be lubricating, changing or adding oil.</li><li>Tightening body and chassis bolts; checking and filling brake systems, hydraulic assemblies, differentials and transmissions for proper lubricant and fluid level; replacing such items as filters, belts, hoses, windshield wipers and similar automotive parts.</li><li>Inspecting brake linings and seals; and repairing and rotating tires as necessary; and adjusting brakes.</li><li>Obtain parts, and tools for the mechanic. Maintains records and reports associated with garage operations as required.</li><li>Other vehicle servicing duties as assigned.</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul>Minimum Qualifications<ul><li>Valid US Driver's License.</li><li>Two or more years of experience with advanced automotive and equipment servicing and repair; general use of personal computers and other related diagnostic equipment.</li></ul>Preferred Qualifications<ul><li>An OEM (Ford, General Motors (GM), Toyota, Altec, etc.) Master Technician certification.</li><li>ASE Master Military Tactical Wheeled Vehicle Certification.</li><li>An Associate of Science (AS), Associate of Applied Science (AAS), Associate of Occupational Studies (AOS) in automotive, heavy truck or diesel studies.</li><li>Experience in troubleshooting vehicle service and repair issues.</li><li>Experience operating fueling equipment.</li><li>Experience using pressure equipment to wash and clean vehicles.</li><li>Perform heavy physical labor.</li></ul>Additional Information&nbsp;<ul><li>This position’s work mode is&nbsp;on-site. The employee will report to an SCE facility or in the field location.&nbsp; Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.&nbsp;</li><li>The successful candidate will be expected and must obtain a Master Auto/Light Truck Certification or ASE Master Medium/Heavy Truck Certification, within 18 months of being hired.&nbsp;</li><li>The successful candidate will be expected and must be able to obtain a Class A License with Tanker endorsement within 6 months of being hiring.&nbsp;</li><li>This position will be working 3pm-12am swing shifts.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

UAV Flight Operations SpecialistTriton Systems, Inc. (Triton) was founded in 1992 as a leading applied research and development company dedicated to creating products and processes for the US government and commercial markets. Since then, we have evolved into an integrated applied R&amp;D and product development firm with a technology venturing arm and a global expertise in myriad of markets. Our team excels at creating and applying innovation to meet our customer's toughest requirements - with the desired results - all within the essential time needed.Triton Systems is developing an innovative fixed-wing Unmanned Aerial Vehicle and requires help with field operations during flight testing. We are seeking a Flight Operations Specialist to support our experienced in-house development and flight test team. Candidates must have significant experience flying radio controlled fixed-wing aircraft, powered or gliders. Most work will involve supporting ground operations, but flying the UAV is possible depending on prior experience and skill level. The work is part-time, and work schedules are contingent upon aircraft readiness for test and weather, so schedule flexibility is necessary. Our program will run for about 5 months with testing planned through March 2025, so a willingness to work outdoors during the winter is necessary. Additional work may be available for candidates with experience building high-performance RC aircraft.The ideal candidate will be able to:<ul><li>Candidates must have significant experience flying radio controlled fixed-wing aircraft, powered or gliders.</li><li>This role will involve supporting ground operations</li><li>flying the UAV is possible depending on prior experience and skill level</li><li>Our program will run for about 5 months with testing planned through March 2025</li><li>Additional work may be available for candidates with experience building high-performance RC aircraft.</li><li>work schedules are contingent upon aircraft readiness for test and weather, so schedule flexibility is necessary</li></ul>Qualifications:<ul><li>Ability to operate a UAV remotely.</li><li>Candidates must have significant experience flying radio controlled fixed-wing aircraft, powered or gliders.</li><li>Have experience as a flight test remote operator.</li><li>Working outdoors during the winter may be necessary.</li></ul>Due to the nature of our business and information associated with this position, interested candidates must be US Citizens and may be subject to a security investigation.Come join our success and grow with the strength of these fascinating new technologies. We are looking for individuals with confidence and the right stuff. We offer a competitive salary with full benefits package.Triton Systems' Headquarters is located in Chelmsford, Massachusetts. For more information, or to apply now, you must go to the website below. Please DO NOT email your resume to us as we only accept applications through our website. <a href="https://tritonsystems.applicantpro.com/jobs/3548224-294220.html" target="_blank">https://tritonsystems.applicantpro.com/jobs/3548224-294220.html</a>

UAV Flight Operations Specialist

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients.&nbsp; The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.What you'll be doingPatient care. &nbsp;You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. &nbsp;You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. &nbsp;You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings. PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

1, 008 Technician Jobs